SAVE THESE INSTRUCTIONS
LOCATION OF CONTROLS
1. Up
2. Mode
3. Down
4. Set
5. Clock Bottom
6. Reset
7. Battery Compartment Cover
8. Mode Lock On/Off
740687_INS_"Bob" 5 in 1 Clock
Instructions Doc. Size: 300mm W x 115mm H Folded Size: 50mmW x 115mmH
Output at 100% Prints 1/1 Black Finishing: Trim to Crops; Accordian Fold: 5 folds
CLOCK OPERATION
INSERTING THE BATTERIES
1. Turn the CLOCK BOTTOM
counterclockwise and remove.
2. Remove the BATTERY
COMPARTMENT COVER.
3. Insert three AAA batteries (not
included) according to polarity
indicators inside the compartment.
4. Replace the BATTERY
COMPARTMENT COVER.
5. Replace the CLOCK BOTTOM
and turn it clockwise to tighten.
SETTING THE TIME
1. Remove the CLOCK BOTTOM
and slide MODE LOCK ON/OFF
to the “On” position.
2. Press MODE until the Time
screen displays. The blue
LED backlight illuminates for
approximately four seconds.
3. Press and hold SET. The hour
blinks on the display.
4. Press
or incrementally until
the correct hour displays. Or press
and hold
or to move at a
faster rate.
5. Press SET again. The minutes
blink on the display.
6. Press
or incrementally until
the correct minutes display.
Or press and hold
or to
move at a faster rate.
7. Press SET again to save your
time selection.
SELECTING 12- OR
24-HOUR MODE
While in the Time screen, press
or
to select either 12- or 24-hour
mode. If 12-hour mode is selected,
PM displays for the afternoon/evening
hours. AM does not display for the
morning hours.
SETTING THE DATE
1. Remove the CLOCK BOTTOM
and slide MODE LOCK ON/OFF
to the “On” position.
2. Press MODE until the Date
screen displays. The orange
LED backlight illuminates for
approximately four seconds.
3. Press and hold SET until the year
starts blinking on the display.
4. Press
or incrementally until
the correct year displays.
Or press and hold
or to
move at a faster rate.
5. Press SET again. The month
blinks on the display.
6. Press
or incrementally
until the correct month displays.
Or press and hold
or to
move at a faster rate.
7. Press SET again. The day blinks
on the display.
8. Press
or incrementally
until the correct day displays.
Or press and hold
or to
move at a faster rate.
9. Press SET again to save your
date selection. The arrow at the
bottom of the display points to the
corresponding day of the week.
SETTING THE ALARM TIME
1. Remove the CLOCK BOTTOM
and slide MODE LOCK ON/OFF
to the “On” position.
2. Press MODE until the Alarm
screen displays. The purple
LED backlight illuminates for
approximately four seconds.
3. Press and hold SET. The hour
blinks on the display.
appears
indicating the alarm function is on.
4. Press
or incrementally until
the correct hour displays.
Or press and hold
or to
move at a faster rate.
5. Press SET again. The minutes
blink on the display.
6. Press
or incrementally
until the correct minutes display.
Or press and hold
or to
move at a faster rate.
7. Press SET again to save your
wake time.
“Bob”
5-in-1 Clock
740687
Brookstone.com | 1-800-846-3000
1 Innovation Way, Merrimack, NH 03054
Find thousands more
great ideas online
CHANGES COLOR &
FUNCTION WITH A PUSH
5
2
1
3
8
7
6
4
To Next Page
Need help?
General
