6
6. Unscrew the SCREW-ON CONNECTOR from your tire valve stem or
remove ball needle.
7. Remove the 12 VOLT PLUG from your vehicle's 12 volt power outlet.
8. Store the Mini Air Compressor, and all of its components in the STORAGE BAG.
InflaTIng sporTs balls
1. Insert Ball Needle (included) into the SCREW-ON CONNECTOR.
2. Carefully press Ball Needle into the ball’s air outlet/inlet valve.
3. To begin inflating, follow steps 3 through 7 on page 5.
NOTE: Keep in mind that the Mini Air Compressor will inflate sports
balls very quickly. Be careful not to over-inflate! Monitor the pressure
carefully. Do not leave unattended while inflating.
To Next Page
Loading...