5
InflaTIng TIres
The Mini Air Compressor will inflate vehicle, bicycle, ATV, or motorcycle tires.
The 12 VOLT PLUG is fitted with a unique built-in adjustable adapter to fit most
vehicles worldwide.
1. Connect the 12 VOLT PLUG into your vehicle's 12 volt power outlet, or any other
12 volt DC power outlet.
2. Connect the SCREW-ON CONNECTOR on the end of the Mini Air Compressor's
2-FOOT AIR HOSE to your tire's valve stem.
NOTE: When inflating certain high-performance/racing bicycle tires,
you may need to use the Presta Valve Adaptor (included).
3. Slide the ON/OFF SWITCH to the ON position and the Mini Air Compressor
will begin to operate. Inflate your tire to the correct pressure (PSI) by checking
the built-in PRESSURE GAUGE located on the 2-FOOT AIR HOSE.
Note: The PRESSURE GAUGE is not exact. It is designed to provide
you with approximate PSI readings that fall within +/— 10%. To ensure
accurate readings at all times, it is recommended that a separate tire
pressure gauge be used.
4. Do not walk away or leave the Mini Air Compressor unattended while inflating
or over-inflation could occur.
5. When the item has finished inflating, shut off your Mini Air Compressor
by sliding the ON/OFF SWITCH to the OFF Position.
To Next Page
Loading...