Brookstone Flip Calculator User Manual

Flip Calculator
WITH WORLD CLOCK,
CALENDAR AND ALARM
Battery installation
Important: This unit comes with the
batteries already installed. Remove
the plastic tab from the battery
compartment before first use.
1. Remove the BATTERY
COMPARTMENT COVER
on the bottom of the unit.
2. Remove spent batteries and replace
them with 2 AG13 button cell
batteries according to the polarity
indicators inside the compartment.
3. Replace the BATTERY
COMPARTMENT COVER securely.
to set the clock
1. Press the key to enter the
TIME MODE.
2. Press the button that shows
a city that has the same time
zone as your current location.
3. Press SET 2 times to set your
local time. The setting sequence
is as follows: Second, Hour,
Minute, Year, Month, Date. Press
SET to cycle through each one.
4. The section to be set will flash.
Press the UP or DOWN key to
adjust the number.
5. Press = key in TIME SET mode
to select 12 or 24 hour mode.
World time set
1. In the TIME MODE press one of
the 16 city keys to search other
time zone’s current times.
2. Press the SET key to set this
city’s time to be the local time.
3. Press
key to go back to the
local time.
alarm set
1. Press key to enter
ALARM MODE.
2. Press
key again to toggle
alarm on/off, indicated by the icon.
3. Press SET to set the alarm time,
the setting sequence is as follows:
Hour, Minute, Normal.
4. The number to be set will flash.
Press the UP or DOWN key to
adjust the number.
5. Press number keys 1 – 6 to
choose an alarm song or
7 and 8 for beeping tones.
Battery PrecaUtions
• Dispose of the old batteries
properly. Do not dispose of
the old batteries in a fire.
• Do not leave the batteries
where a child or pet could play
with or swallow them. If the
batteries are swallowed, contact
a physician immediately.
• The batteries may explode
if mistreated. Do not attempt
to recharge or disassemble
the batteries.
• Use only fresh batteries of the
required size and type. Do not
mix old and new batteries,
different types of batteries,
or rechargeable batteries of
different capacities.
save these instrUctions!
location of controls
Closed
Open
1. Flip Button
2. Reset Button
3. Speaker
4. Battery Compartment
5. Stand
6. LCD Screen
7. Keypad
741524_INS_Flip Calculator Instructions Doc. Size: 250mm W x 115mm H Folded Size: 50mmW x 115mmH Output at 100% Prints 1/1 Black Finishing: Trim to Crops; Accordian Fold: 4 folds
1
4
3
2
5
6
7

Brookstone Flip Calculator Specifications

Battery

battery_type	AG13 Button Cell
battery_quantity	2

Summary

Battery Management

Battery Precautions

Safety guidelines for handling, disposing, and using batteries to prevent hazards like explosion or swallowing.

Battery Installation

Instructions for initial battery tab removal and replacement of batteries with specific types and polarity.

Device Operation and Settings

Location of Controls

Identification and description of the calculator's physical buttons, LCD screen, and other components.

Setting the Clock

Step-by-step guide to setting the local time, sequence, and adjusting numbers using specific keys.

World Time Set

How to search for other time zones and set a selected city's time as the local time.

Alarm Set

Instructions for entering alarm mode, toggling the alarm, setting the time, and choosing sounds.

Timer Functions

Count Down Time Set

Procedure for setting the count down timer, including seconds, hours, and minutes adjustment.

Using the Timer

How to start, pause, resume, and reset the count down timer, and what happens when it reaches zero.

Additional Features and Support

Keytone Toggle

How to turn the audible key tone beep on or off in any mode.

Troubleshooting

Guidance on resolving issues like malfunctioning buttons or display graphics by using the reset button.

One Year Limited Warranty

Details of Brookstone's one-year warranty, service obtainment, limitations, and exclusions.