7
Insert the Setup/Application CD-ROM into your CD-ROM drive.
Select “Install the Software Automatically (Recommended)” and click
on the “Next” button.
Click on the “Next” button in the window that appears, and skip to
the FINISHING THE INSTALL section on page 8.
Select “Locate and Install Driver Software (Recommended)” when
the “Found New Hardware” window is displayed.
Click on the “Continue” button when the “User Account Control”
button pops up.
Insert the Setup/Application CD-ROM into your CD-ROM drive
when the system prompts you to “Insert the disk that came with
your USB Scanner” and then click on the “Next” button.
During the process of the installation, a message “Windows can’t verify
the publisher of this driver software” may appear. Please ignore and click
on “Install this drive software anyway” to continue the installation.
Click on the “Next” button in the window that appears, and skip to
the FINISHING THE INSTALL section on page 8.
Insert the Setup/Application CD-ROM into your CD-ROM drive. Close the
AutoPlay window that appears.
•
•
•
•
•
•
•
•
•
To Next Page
Loading...
