4
Plug Adapter into connection on the bottom of the unit, being careful not
to scratch the finish as you turn the unit over, and plug into wall outlet
Pull WATCH CUSHION off WATCH MOUNT
Affix watch around WATCH MOUNT with the watch face on top and
secure with WATCH CUSHION
Choose desired direction from the list on page 3 and adjust the DIRECTIONAL
SWITCH accordingly
Choose desired sequence and adjust the TPD SWITCH accordingly
6 Turn power on with the ON/OFF BUTTON
7 Repeat steps 2 through 6 for the second WATCH MOUNT to wind an
additional timepiece
Do not insert or remove any watch while mechanism is turning
To reset the timer, switch the power off then unplug the Adapter from the back of the
winder for 3 seconds Insert Adapter back into winder and switch the power on
Wipe with a soft, dry cloth Do not use abrasive cleaning agents
1
2
3
4
5
To Next Page
Loading...