20
Error Code Solution
80 Erroneous motor parameter
Switch the system completely off and on again using the T4
key on the control unit. If the problem persists, contact your
e-bike dealer.
81 Speed signal is not detected Make sure that the spoke magnet is correctly positioned
opposite the speed sensor.
82 The program has been manipulated
Switch the system completely off and on again using the T4
key on the control unit. If the problem persists, contact your
e-bike dealer.
83 Error in the program flow
84 Erroneous motor parameter
6) Technical Data 7) Disposal
In accordance with the European Directive
2012/19/EU, electrical appli-ances that are no
longer serviceable must be collected separately,
and in accordance with the European Directive
2006/66/EC, defective or used batteries must be
collected separately and reused in an environmen-
tally friendly manner.
Old machines, replacement parts and packaging
are made of recyclable materials. The owner is
obliged to dispose of these properly and in an
environmentally friendly manner in accordance
with the statutory regula-tions.
All plastic injection molded parts are marked with
a recycling symbol.
RoHS Directive (2011/65/EU)
Comfort control unit
Length x width x height 72.8 x 50.2 x 44.6 mm
Operating temperature -10°C to 65°C
Storage temperature -20°C to 85°C
Protection class IP65 (HMI) dustproof, water
spray proof
ESD model Human Body Model (HBM)
USB interface Micro USB Standard 2.0 Full
Speed
USB charging function USB Battery Charging Stan-
dard BC1.2 Max. 1,0 A
CAN Interface ISO 11898-5 High-speed CAN
Description
To Next Page
Loading...