22
Engine Set-Ups
The Brose e-bike system supports various engine
set-ups. Together with the bicycle manufacturers,
these are individually adjusted for each bicycle
model. Detailed information on the motor set-up
of your e-bike can be obtained from your bicycle
manufacturer and your bicycle dealer.
Influences on the Range
The distance range is influenced by many factors,
such as:
• Support level
The higher the support level is selected with other-
wise the same conditions, the lower the range is.
• Shifting behavior
• Type of tires
• Tire pressure
• Age, maintenance and charge level of the bat-
tery pack
• Route profile (gradients) and route condition
(road surface)
• Weather conditions (e.g. headwind, ambient
temperature etc.)
• Weight of the e-bike
• Payload
Maintenance & Cleaning
Avoid contact of the drive unit with aggressive
cleaning products and care products, especially
penetrating oils and brake cleaners.
The drive unit must neither be immersed in water
nor cleaned with a high-pressure washer.
For service or repairs to the e-bike, please contact
an authorized bicycle dealer.
Service
The drive unit must be inspected by a Brose-certi-
fied service center after a service life of 15,000 km.
Information on the service center responsible can
be obtained from your bicycle dealer.
Disposal
Drive unit, display unit and control unit, battery
pack, speed sensor, accessories and packaging
are to be recycled in an environmentally friendly
manner. Do not dispose of e-bikes and their com-
ponents in household waste!
For EU countries only:
Technical Data
According to the European directive
2012/19/EU, electrical appliances
that are no longer fit for use must
be collected separately, and ac-
cording to the European directive
2006/66/EC, defective or used bat-
teries must be collected separately
and reused in an environmentally
sound manner.
Brose drive unit 25 km/h
Brose material number C16162/C91143/C97272
Dimensions 213x150x128 mm
Weight 3,400g
Nominal voltage 36 V
Protection class IP56
Torque max. 90nm
Continuous rated power 250 W
Pushing aid up to 6 km/h
To Next Page
Loading...