EasyManua.ls Logo

Brother Max 6-in-1 - User Manual

Brother Max 6-in-1
13 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Brother Max 6-in-1 Thermometer
USER MANUAL
Please read the instructions carefully before using the
thermometer
Quick-start Guide
Press the FACE button and keep holding it down whilst
approaching the centre of the forehead until you see the
temperature displayed inside the rectangle.
Too Far
Too close
Correct distance
If, when pressing the “face” button, the projection
shows CAL (“face” and “home” lights will flash), press the
“face” and “home” buttons simultaneously and
direct the projection onto an internal wall or another hard
surface. Release the buttons. Now the device is calibrated
to the room temperature and ready to take accurate body
temperature measurements when pressing the “face”
button.
To take temperature of objects, walls etc., press the “home”
button.
The 6-in-1 Thermometer is an infrared thermometer,
intended for measurement of human body temperature in
people of all ages.
1. INTRODUCTION
Dear Customer, thank you for buying the 6-in-1
Thermometer. The 6-in-1 Thermometer is very easy to use.
It is capable of measuring a child or an adult's temperature
without ever coming into contact with the skin: just hold it
close to the forehead, using the aiming system to ensure it
is at the correct distance. The 6-in-1 Thermometer does not
need to touch any part of your child's body, so even if your
child is sleeping, it will not disturb him or her.

Table of Contents

Questions and Answers

  • A
    anna97Aug 20, 2025
    What to do if Brother Max 6-in-1 reads over 40°C/104°F?
    • J
      james07Aug 20, 2025
      If your Brother Max Thermometer displays a temperature over 40°C/104°F, it is recommended to seek medical attention.
  • R
    Reginald EscobarAug 22, 2025
    How to reset Brother Max 6-in-1 Thermometer when lights stay on?
    • J
      Jason MatthewsAug 22, 2025
      If the Brother Max thermometer appears stuck and the lights stay on for longer than 1 minute, reset it by removing and reinserting the batteries.
  • W
    William MatthewsAug 25, 2025
    Why is the projected temperature not clearly visible on my Brother Max Thermometer?
    • A
      agrayAug 25, 2025
      If the projected temperature on your Brother Max Thermometer is not clearly visible, try taking the reading in the shade or replace the batteries.
  • B
    Brent CraigAug 26, 2025
    Why is the Brother Max 6-in-1 Thermometer temperature reading too low?
    • A
      Anthony VelasquezAug 27, 2025
      If the Brother Max thermometer temperature reading is too low, ensure you have carefully read all the warnings. Also, check that the sensor is not dirty or damaged; if it is, clean it. Make sure that the thermometer is being held perpendicular to the forehead.
  • P
    Pamela FlemingAug 28, 2025
    How to fix Brother Max Thermometer projection when it doesn't turn on?
    • I
      Isaiah HouseAug 28, 2025
      If the projection on your Brother Max thermometer does not turn on, the batteries may be completely dead or incorrectly inserted. Replace or reinsert them.
  • W
    willisdevinAug 30, 2025
    What to do if Brother Max Thermometer says room temperature is too high (above 45°C / 113°F)?
    • A
      Andrew WillisAug 30, 2025
      If your Brother Max thermometer displays that the room temperature is too high (above 45°C / 113°F), move to another, cooler site.
  • S
    simmonsangelaSep 1, 2025
    Why does the Brother Max Thermometer show a forehead temperature that appears too low?
    • S
      Sarah DavisSep 1, 2025
      If the forehead temperature appears to be too low on your Brother Max Thermometer, make certain the sensor is not dirty or damaged and that the subject has not come from a cold room.
  • M
    Mikayla SanchezSep 3, 2025
    What does it mean when the Brother Max Thermometer temperature exceeds the limit?
    • E
      edwardharrisSep 3, 2025
      If the temperature detected by your Brother Max Thermometer exceeds the limit for operation with the selected button, the temperature reading cannot be taken.
  • B
    Barbara CuevasSep 5, 2025
    What happens if the room temperature is too high (above 40°C / 104°F) for Brother Max Thermometer?
    • D
      Dustin Collins MDSep 5, 2025
      If the room temperature is too high (above 40°C / 104°F) when using the Brother Max Thermometer, the temperature reading can be taken, but accuracy is not guaranteed.
  • C
    Colleen MooreSep 7, 2025
    What to do if Brother Max 6-in-1 shows the room temperature is too low (below 10°C or 50°F)?
    • E
      Erica KramerSep 7, 2025
      If the room temperature is too low (below 10°C or 50°F) when using the Brother Max Thermometer, move to another, warmer room.

Summary

Quick-start Guide

INTRODUCTION

WARNINGS

2.1 IMPORTANT

Crucial guidelines for accurate readings, covering environmental factors and subject preparation.

ATTENTION

HOW IT WORKS

HOW TO USE

4.1 Taking the body temperature: FOREHEAD

Step-by-step guide for measuring body temperature on the forehead using the device.

4.2 If there is sweat (or oils) on the forehead, take the reading from the eyelid

4.3 Other readings

5. AMBIENT TEMPERATURE and MEMORY FUNCTION

6. ROOM TEMPERATURE CALIBRATION

7. HOW TO CHANGE the SETTINGS

8. TROUBLESHOOTING

9. WHAT DO THE DISPLAY SYMBOLS MEAN?

10. CLEANING

11. REPLACING the BATTERIES

GUARANTEE

TECHNICAL CHARACTERISTICS

Brother Max 6-in-1 Specifications

General IconGeneral
BrandBrother Max
Model6-in-1
CategoryThermometer
LanguageEnglish

Related product manuals