To Next PageTo Next PageHow to align bobbin case on Brother Sewing Machine?
To resolve the issue, ensure that the '?' mark on the bobbin case aligns correctly with the '?' mark on the Brother Sewing Machine. Verify that these indicated points are aligned before you install the bobbin case.
What to do if the needle plate cover won't close on my Brother 888-M20 Sewing Machine?
If you're having trouble, insert the tabs located on the needle plate cover into the corresponding slots on the needle plate. Once inserted, slide the cover back on your Brother Sewing Machine to secure it.
What to do if my Brother 888-M20 is not responding?
To resolve the issue, turn the main power switch of your Brother Sewing Machine to the OFF position. Wait a few seconds, and then turn it back to the ON position.
General| Brand | Brother |
|---|---|
| Model | 888-M20 |
| Category | Sewing Machine |
| Language | English |
Essential safety guidelines to prevent injury and electrical shock.
Safety advice tailored for different user groups and country standards.
Identification of main parts, needle, and presser foot sections.
Details on included, optional accessories, and basic setup.
Instructions for turning the machine on/off and using the LCD.
Configuring machine settings, input sensitivity, and embroidery options.
Steps for winding the bobbin and threading the upper thread.
Guidance on checking, replacing needles, and changing presser feet.
Covers basic sewing, stitch types, and starting procedures.
Adjusting stitch width, length, L/R shift, and thread tension.
Advice on sewing curves, fabrics, and cylindrical pieces.
A comprehensive guide to available stitches, their applications, and settings.
Detailed instructions for various utility stitches like blind hem and buttonholes.
Attaching feet, units, frames, and preparing fabric.
Guide to selecting patterns, editing, and executing embroidery.
Saving, retrieving, and managing embroidery patterns using memory or USB.
Procedures for cleaning and maintaining the sewing machine.
Instructions for updating the machine's software via USB.
Initial checks for machine malfunctions and touch panel issues.
Addresses issues like skipped stitches, thread tangling, and fabric feed problems.
Explains specific error messages and embroidery-related problems.
