Why is the lower thread protruding from the top of the material on my Brother BAS-326G PS?
If the lower thread is protruding from the top of the material on your Brother Sewing Machine, it may be because: * The thread take-up spring tension is too strong: Adjust the tension of the thread take-up spring. * There is insufficient thread take-up amount: Adjust the position of arm thread guide R.
What to do if thread wiper does not operate correctly on Brother Sewing Machine?
If the thread wiper on your Brother Sewing Machine isn't operating correctly: * If the thread wiper is obstructing the needle, adjust the height of the thread wiper. * If the thread wiper position is incorrect, adjust the stroke of the thread wiper.
Why is thread unravelling at the sewing start on my Brother Sewing Machine?
If thread is unravelling at the sewing start on your Brother Sewing Machine, it may be because the rotary hook pulls the upper thread. To solve this, use the programmer to reduce the intermittent presser foot height so that the upper thread is pressed by the intermittent presser foot at the 1st stitch.
What causes the work clamp to not lift or drop on my Brother BAS-326G PS?
If the work clamp on your Brother Sewing Machine is not lifting or dropping, it could be due to: * The work clamp moving stiffly: Apply a suitable amount of grease to the sliding parts of the work clamp. * The air tube of the air cylinder being bent or damaged: Straighten the bend in the tube or replace the tube.
Why does the lower thread wind to one side on my Brother BAS-326G PS Sewing Machine?
If the lower thread winds to one side on your Brother Sewing Machine, adjust the height of the bobbin winder tension assembly, as its height is likely incorrect.
What to do if the work clamp does not lift to the maximum height on my Brother BAS-326G PS Sewing Machine?
If the work clamp on your Brother Sewing Machine does not lift to the maximum height, adjust the position of the cylinder joint, as it is likely incorrect.
General| Brand | Brother |
|---|---|
| Model | BAS-326G PS |
| Category | Sewing Machine |
| Language | English |
Explains the meanings of safety indications and symbols used in the manual.
Provides general safety guidelines and precautions for machine operation.
Lists components considered safety devices for the machine.
Details the procedure for mounting the control box.
Explains how to securely mount the sewing machine head.
Describes the safe procedure for tilting the machine head.
Details the process of mounting the operation panel.
Outlines the installation of the pneumatic system components.
Describes how to connect various machine cables and harnesses.
Explains the importance and procedure for grounding the machine.
Details how to safely connect the main power supply.
Details the procedure for attaching the safety eye guard.
Describes the correct procedure for lubricating the sewing machine.
Details how to correctly install the sewing machine needle.
Step-by-step guide for threading the upper thread.
Explains how to operate the foot switch for sewing control.
Instructions for winding the lower thread onto the bobbin.
Details the procedure for correctly installing the bobbin case.
Provides reference values and methods for adjusting thread tension.
Guide to recording, setting, and using custom user programs.
How to record and use cycle programs for sequential pattern sewing.
Steps to reinitialize all memory data to restore normal operation.
Step-by-step guide for performing a sewing operation.
Refers to the lubrication section in INSTALLATION.
Lists error codes related to switch operations and their remedies.
Lists error codes for upper shaft motor issues and their solutions.
Lists error codes for feed mechanism problems and their remedies.
Error codes concerning the work clamp and their associated remedies.
Lists error codes related to communication and memory issues.
Steps to diagnose and fix the machine not operating with power and foot switch.
To Next Page
