Brother DCP-L2540DN How To Replace Drum Unit

- 8 -
6
Przejdź do strony http://www.brother.com/original/index.html, aby uzyskać informacje dotyczące zwrotu zużytych materiałów eksploatacyjnych w programie zbiórki
Brother. Jeśli nie zdecydujesz się na zwrot zużytego materiału eksploatacyjnego, prosimy pozbyć się go zgodnie z lokalnymi przepisami i nie wyrzucać ich do śmieci.
W razie wątpliwości należy skontaktować się z miejscowym organem nadzorującym gospodarkę odpadami.
[ Polski ] ZRESETUJ LICZNIK ZESPOŁU BĘBNA
Upewnij się, że urządzenie jest włączone.
<Dla HL-L2300D/HL-L2320D/HL-L2321D>
(1) Upewnij się, że przednia pokrywa jest otwarta.
(2) Naciśnij i przytrzymaj przycisk Go (Przejdź) przez około
cztery sekundy, aż zaświecą się wszystkie diody LED. Gdy
zaświecą wszystkie cztery diody LED, zwolnij przycisk Go
(Przejdź).
(3) Zamknij pokrywę przednią.
(4) Upewnij się, że dioda LED Drum (Bęben) przestała świecić.
<Dla HL-L2340DW/HL-L2360DN/HL-L2360DW/HL-L2361DN/
HL-L2365DW/HL-L2366DW>
(1) Upewnij się, że przednia pokrywa jest otwarta.
(2) Naciśnij i przytrzymaj przycisk OK przez około dwie sekundy,
aby wyświetlić komunikat ZESPÓŁ BĘBNA, a następnie
naciśnij przycisk OK.
(3) Naciśnij a, aby wyświetlić RESET i zresetuj licznik bębna.
(4) Zamknij pokrywę przednią.
<Dla DCP-L2500D/DCP-L2520D/DCP-L2520DW/DCP-L2540DN/
DCP-L2540DW/DCP-L2541DW/MFC-L2700D/MFC-L2700DN/
MFC-L2700DW/MFC-L2701D/MFC-L2701DW/MFC-2703DW>
(1) Upewnij się, że przednia pokrywa jest otwarta.
(2) Naciśnij i przytrzymaj przycisk OK przez około dwie sekundy,
aby wyświetlić komunikat WYMIENIĆ BĘBEN?.
(3) (Modele DCP) Naciśnij a, aby zresetować licznik bębna.
(Modele MFC) Naciśnij 1, aby zresetować licznik bębna.
(4) Zamknij pokrywę przednią.
<Dla HL-L2380DW/DCP-L2560DW/MFC-L2720DW/MFC-L2740DW>
(1) Zamknij pokrywę przednią.
(2) Naciśnij
, aby naprawić błąd.
(3) Naciśnij
(Ust aw.) > Ustawienia > Inf. o urządz. >
Trwałość części.
(4)
Naciskaj #, aż zostanie zmieniony komunikat ekranu dotykowego.
(5) Naciśnij Bęben, a następnie naciśnij Tak.
(6) Naciśnij
.
6
Отидете на http://www.brother.com/original/index.html за инструкции относно връщането на използвани консумативи по програмата за тяхното събиране
от Brother. Ако изберете да не връщате използваните консумативи, моля, изхвърляйте ги в съответствие с местните разпоредби, отделно от битовите
отпадъци. Ако имате въпроси, обадете се в местния пункт за вторични суровини.
[ Български ] НУЛИРАЙТЕ БРОЯЧА НА МОДУЛА НА БАРАБАНА
Уверете се, че устройството е включено.
<За HL-L2300D/HL-L2320D/HL-L2321D>
(1) Уверете се, че предният капак е отворен.
(2)
Натиснете и задръжте Go (Почни) за около четири секунди,
докато не светнат всички светодиоди. След като четирите
светодиода светнат, отпуснете бутона Go (Почни).
(3) Затворете предния капак.
(4) Уверете се, че светодиодът Drum (Барабан) сега е
изгаснал.
<За HL-L2340DW/HL-L2360DN/HL-L2360DW/HL-L2361DN/
HL-L2365DW/HL-L2366DW>
(1) Уверете се, че предният капак е отворен.
(2) Натиснете и задръжте OK за около две секунди, за да се
покаже Барабан, след което натиснете OK.
(3) Натиснете a, за да се покаже Reset и да се нулира
броячът на барабана.
(4) Затворете предния капак.
<За DCP-L2500D/DCP-L2520D/DCP-L2520DW/DCP-L2540DN/
DCP-L2540DW/DCP-L2541DW/MFC-L2700D/MFC-L2700DN/
MFC-L2700DW/MFC-L2701D/MFC-L2701DW/MFC-2703DW>
(1) Уверете се, че предният капак е отворен.
(2) Натиснете и задръжте OK за около две секунди, за да се
покаже Смени барабана?.
(3)
(DCP модели) Натиснете a, за да се нулира броячът на барабана.
(MFC модели) Натиснете 1, з
а да се нулира броячът на барабана.
(4) Затворете предния капак.
<За HL-L2380DW/DCP-L2560DW/MFC-L2720DW/MFC-L2740DW>
(1) Затворете предния капак.
(2) Натиснете
, за да прекъснете грешката.
(3) Натиснете
(Настр.) > Вси. настр. > Инфор.за маш. >
Живот на части.
(4) Натискайте #, докато се промени съобщението на
сензорния екран.
(5) Натиснете Барабан, след което натиснете Да.
(6) Натиснете
.
6
Vizitaţi http://www.brother.com/original/index.html pentru instrucţiuni legate de modul în care puteţi returna consumabilele uzate în cadrul programului de colectare
Brother. Dacă optaţi pentru a nu returna consumabilele uzate, vă rugăm să le eliminaţi în conformitate cu reglementările locale, separându-le de deşeurile menajere.
Dacă aveţi întrebări, contactaţi centrul de colectare local.
[ Română ] RESETAŢI CONTORUL UNITĂŢII DE CILINDRU
Vericaţi dacă aparatul este pornit.
<Pentru HL-L2300D/HL-L2320D/HL-L2321D>
(1) Asiguraţi-vă că este deschis capacul frontal.
(2) Apăsaţi butonul Go (Iniţializare) şi menţineţi-l apăsat timp
de aproximativ patru secunde până când se aprind toate
LED-urile. După ce toate LED-urile se aprind, eliberaţi butonul
Go (Iniţializare).
(3) Închideţi capacul frontal.
(4) Asiguraţi-vă că LED-ul Drum (Cilindru) este stins acum.
<Pentru HL-L2340DW/HL-L2360DN/HL-L2360DW/HL-L2361DN/
HL-L2365DW/HL-L2366DW>
(1) Asiguraţi-vă că este deschis capacul frontal.
(2) Apăsaţi şi menţineţi apăsat butonul OK timp de aproximativ
două secunde pentru a aşa Unitate cilin, iar apoi
apăsaţi pe OK.
(3) Apăsaţi a pentru a aşa Reset şi resetaţi apoi contorul
cilindrului.
(4) Închideţi capacul frontal.
<Pentru DCP-L2500D/DCP-L2520D/DCP-L2520DW/DCP-L2540DN/
DCP-L2540DW/DCP-L2541DW/MFC-L2700D/MFC-L2700DN/
MFC-L2700DW/MFC-L2701D/MFC-L2701DW/MFC-2703DW>
(1) Asiguraţi-vă că este deschis capacul frontal.
(2) Apăsaţi şi menţineţi apăsat butonul OK timp de aproximativ
două secunde pentru a aşa Cilindru inloc.?.
(3) (Modelele DCP) Apăsaţi a pentru a reseta contorul cilindrului.
(Modelele MFC) Apăsaţi 1 pentru a reseta contorul cilindrului.
(4) Închideţi capacul frontal.
<Pentru HL-L2380DW/DCP-L2560DW/MFC-L2720DW/MFC-L2740DW>
(1) Închideţi capacul frontal.
(2) Apăsaţi
pentru a întrerupe eroarea.
(3) Apăsaţi
(Setări) > Toate set. > Info. aparat >
Funcţionare componente.
(4) Apăsaţi # până când mesajul de pe ecranul tactil se modică.
(5) Apăsaţi Cilindru, apoi apăsaţi Da.
(6) Apăsaţi
.
Zakończ
Край
Finalizare

Brother DCP-L2540DN Specifications

General

Duplex printing	Yes
Print technology	Laser
Maximum resolution	2400 x 600 DPI
Duplex printing mode	Auto
Time to first page (black, normal)	8.5 s
Print speed (black, normal quality, A4/US Letter)	30 ppm
Duplex print speed (color, normal quality, A4/US Letter)	6.5 ppm
Copier resize	25 - 400 %
Maximum copy resolution	600 x 600 DPI
Maximum number of copies	99 copies
N-in-1 copy function (N=)	2, 4, 6, 9, 16, 25
Time to first copy (black, normal)	10 s
Copy speed (black, normal quality, A4)	26 cpm
Scan to	E-mail, File, FTP, Image, OCR
Scan drivers	ICA, SANE, TWAIN, WIA
Grayscale levels	256
Input color depth	30 bit
Maximum scan area	A4 (210 x 297) mm
Output color depth	24 bit
Maximum scan resolution	19200 x 19200 DPI
Optical scanning resolution	600 x 2400 DPI
Faxing	No
PCL fonts	66
Printing colors	Black
Maximum duty cycle	10000 pages per month
Recommended duty cycle	250 - 2000 pages per month
Number of print cartridges	1
Page description languages	BR-Script 3, GDI, Microsoft XPS, PCL 6, PDF 1.7
Processor family	ARM9
Sound power level (standby)	33 dB
Sound pressure level (printing)	50 dB
Sound pressure level (quiet mode)	45 dB
Paper input type	Paper tray
Total input capacity	250 sheets
Total output capacity	100 sheets
Multi-Purpose tray input capacity	1 sheets
Auto document feeder (ADF) input capacity	35 sheets
Custom media width	76.2 - 215.9 mm
Custom media length	127 - 355.6 mm
Paper tray media types	Bond paper, Envelopes, Labels, Plain paper, Recycled paper, Thick paper, Thicker paper, Thin paper
Paper tray media weight	60 - 105 g/m²
Non-ISO print media sizes	Executive
ISO A-series sizes (A0...A9)	A4, A5, A6
JIS B-series sizes (B0...B9)	B5
Maximum ISO A-series paper size	A4
Multi-Purpose Tray media weight	60 - 163 g/m²
Auto Document Feeder (ADF) media weight	64 - 90 g/m²
Display	LCD
Market positioning	Home & office
Display number of lines	2 lines
Display number of characters	16
Cabling technology	10/100Base-T(X)
Security algorithms	APOP, SMTP-AUTH, SNMP
Ethernet LAN data rates	10, 100 Mbit/s
Mobile printing technologies	Apple AirPrint, Brother iPrint & Scan, Google Cloud Print
Supported network protocols (IPv4)	ARP, RARP, BOOTP, DHCP, APIPA(Auto IP), WINS/NetBIOS, DNS resolver, mDNS, LLMNR responder, LPR/LPD, Custom Raw Port/Port 9100, IPP, FTP Server, SNMPv1/v2c/v3, HTTP Server, TFTP Client/Server, SMTP Client, ICMP, Web Services (Print/Scan), SNTP Client, POP3, IMAP4
Supported network protocols (IPv6)	NDP, RA, DNS Resolver, mDNS, LLMNR responder, LPR/LPD, Custom Raw Port/ Port 9100, IPP, FTP Server, SNMPv1/v2c/v3, HTTP Server, TFTP Client/Server, SMTP Client, ICMPv6, Web Services (Print/Scan), SNTP Client, POP3, IMAP4
Direct printing	-
Standard interfaces	Ethernet, USB 1.1, USB 2.0
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (max)	1104 W
Power consumption (off)	0.08 W
Power consumption (standby)	60 W
Power consumption (PowerSave)	6.6 W
Power consumption (average operating)	510 W
Minimum storage drive space	500 MB
Mac operating systems supported	Mac OS X 10.7 Lion, Mac OS X 10.8 Mountain Lion, Mac OS X 10.9 Mavericks
Server operating systems supported	Windows Server 2003, Windows Server 2003 x64, Windows Server 2008, Windows Server 2008 R2, Windows Server 2008 x64, Windows Server 2012, Windows Server 2012 R2
Windows operating systems supported	Windows 7 Home Basic, Windows 7 Home Basic x64, Windows 7 Home Premium, Windows 7 Home Premium x64, Windows 7 Professional, Windows 7 Professional x64, Windows 7 Starter, Windows 7 Starter x64, Windows 7 Ultimate, Windows 7 Ultimate x64, Windows 8, Windows 8 Enterprise, Windows 8 Enterprise x64, Windows 8 Pro, Windows 8 Pro x64, Windows 8 x64, Windows 8.1, Windows 8.1 Enterprise, Windows 8.1 Enterprise x64, Windows 8.1 Pro, Windows 8.1 Pro x64, Windows 8.1 x64, Windows Vista Business, Windows Vista Business x64, Windows Vista Enterprise, Windows Vista Enterprise x64, Windows Vista Home Basic, Windows Vista Home Basic x64, Windows Vista Home Premium, Windows Vista Home Premium x64, Windows Vista Ultimate, Windows Vista Ultimate x64, Windows XP Home, Windows XP Home x64, Windows XP Professional, Windows XP Professional x64
Sustainability certificates	Nordic Swan Ecolabel, Blue Angel, ENERGY STAR
Package depth	567 mm
Package width	517 mm
Package height	435 mm
Package weight	14200 g
Storage temperature (T-T)	0 - 40 °C
Operating temperature (T-T)	10 - 32 °C
Storage relative humidity (H-H)	10 - 90 %
Operating relative humidity (H-H)	20 - 80 %

Weight and Dimensions

Depth	409 mm
Width	398.5 mm
Height	316.5 mm