EasyManuals Logo

Brother DCP-L5600DN Online User's Guide

Brother DCP-L5600DN
731 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #353 background imageLoading...
Page #353 background image
Home > Network > Additional Methods of Configuring Your Brother Machine for a Wireless
Network > Configure Your Machine for a Wireless Network in Ad-Hoc Mode (For IEEE 802.11b/g/
n) > Configure Your Machine for a Wireless Network in Ad-Hoc Mode Using an Existing SSID
Configure Your Machine for a Wireless Network in Ad-Hoc Mode Using
an Existing SSID
Related Models: MFC-L5700DW/MFC-L5705DW/MFC-L5800DW/MFC-L5850DW/MFC-L5900DW/
MFC-L6700DW/MFC-L6800DW
If you are trying to pair your Brother machine to a computer that is already in Ad-Hoc mode and has a configured
SSID, use these instructions.
Before configuring your machine, we recommend writing down your wireless network settings. You will need
this information before you continue with the configuration.
1. Check and record the current wireless network settings of the computer to which you are connecting.
The wireless network settings of the computer you are connecting with must be set to Ad-Hoc mode with an
SSID already configured. For more information on how to configure your computer in Ad-Hoc mode, see
the instructions included with your computer or contact your network administrator.
Network Name (SSID)
Communication Mode Encryption Mode Network Key
Ad-Hoc NONE -
WEP
For example:
Network Name (SSID)
HELLO
Communication Mode Encryption Mode Network Key
Ad-Hoc WEP 12345
Your Brother machine supports the use of the first WEP key only.
2. Press [ ] [Settings] > [All Settings] > [Network] > [WLAN] > [Setup Wizard].
3. When [Enable WLAN?] appears, press [Yes].
This will start the wireless setup wizard. To cancel, press [No].
4. The machine will search for your network and display a list of available SSIDs. If a list of SSIDs is displayed,
swipe up or down or press a or b to display the SSID to which you want to connect, and then press the SSID.
5. Press [OK].
6. Enter the WEP key, and then press [OK].
Your Brother machine supports the use of the first WEP key only.
7. The machine attempts to connect to the wireless device you have selected.
If your wireless device is connected successfully, the machine's LCD displays [Connected].
346

Table of Contents

Other manuals for Brother DCP-L5600DN

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Brother DCP-L5600DN and is the answer not in the manual?

Brother DCP-L5600DN Specifications

General IconGeneral
Typeall in one
Colorblack/gray, multi
Touch Screenyes
Display Size3.7 inches
Tray Capacity50
Output Tray Capacity150 sheets
Automatic Document Feeder Capacity70 sheets
Paper Sizeansi a, legal, executive, a4, a5, a6, folio
Paper Handlingletter, legal, executive, a4, a5, a6, envelopes, custom sizes (3.0-8.5" (w), 5.0-14" (l))
Paper Weight60 grams per square meter
Printing Methodmonochromatic
Color Print Speed0 pages per minute
Mono Print Speed42 pages per minute
First Page Print Time7 seconds
Print Resolution Monoup to 1200 x 1200
Two-Sided Printingyes
Maximum Number of Pages Per Monthup to 50, 000
Reduction and Enlargementno
Photo Printingno
Scanner Typeflatbed
Scan Resolutionup to 1200 x 1200
Duplex Scanyes
Max Copies99
Copier Resolution Monoup to 1200 x 600
Fax Functionno
Cartridgesbrother tn820, brother tn850
Number Of Cartridges1
Internal Memoryyes
Memory Cardno
Networkwired
Connectivityusb 2.0, ethernet
Mobile Devices Connectionno
Weight and Dimensions IconWeight and Dimensions
Depth16.8 inches
Height16.8 inches
Width19.5 inches
Net Weight37.7 pounds

Related product manuals