Why my Brother EX-660 Sewing Machine doesn't work?
Your Brother Sewing Machine might not be working due to a few reasons: it's not plugged in (plug it in), the main power switch is off (turn it on), the bobbin winder shaft is pushed to the right (move it to the left), or the foot controller isn't being used properly (use it correctly).
How to fix skipped stitches on my Brother Sewing Machine?
To fix skipped stitches on your Brother Sewing Machine, first ensure that the upper thread is threaded properly. Next, check that you are using the right combination of fabric, thread, and needle. A bent or blunt needle can also cause skipped stitches, so replace it if needed. Finally, remove the needle plate cover and clean the plate and the bobbin case if dust has accumulated.
Why is the fabric not feeding through my Brother EX-660 Sewing Machine?
If the fabric isn't feeding through your Brother Sewing Machine, check if the feed dogs are lowered and slide the feed dog position lever. Also, make sure you are using the right combination of fabric, thread, and needle.
How to prevent upper thread from breaking on my Brother EX-660?
To prevent the upper thread from breaking on your Brother Sewing Machine, make sure that the upper thread is threaded properly. Also, ensure that the needle is appropriate for the type of thread you are using. If the upper thread tension is too tight, loosen it. Finally, check the needle and replace it if it is bent or blunt.
How to fix incorrect thread tension on a Brother EX-660?
To fix incorrect thread tension on your Brother Sewing Machine, ensure the upper thread is threaded properly and the bobbin thread is wound correctly. Verify that you're using the right combination of thread and needle for your fabric. Also, make sure the presser-foot holder is attached properly. If these steps don't resolve the issue, adjust the tension of the upper thread.
What to do if the needle breaks on my Brother EX-660?
If the needle on your Brother Sewing Machine breaks, several factors could be at play. Ensure the needle is fitted properly and the needle clamp screw is firmly tightened with a screwdriver. The needle might be bent or blunt, requiring a replacement. Also, verify that you're using the correct combination of fabric, thread, and needle. The presser foot should also be appropriate for the stitch type. Lastly, check if the upper thread tension is too tight and loosen it if necessary. Make sure you are using the correct bobbin designed for your machine.
What to do if the lower thread is tangled on my Brother EX-660?
If the lower thread is tangled or breaks on your Brother Sewing Machine, wind the bobbin thread properly. If the thread is tangled, remove the tangled thread and clean the bobbin case. Ensure the bobbin is set correctly.
Why is the fabric wrinkled when using my Brother EX-660?
Fabric wrinkling with your Brother Sewing Machine can occur if the upper thread isn't threaded properly, or the bobbin isn't fitted correctly; in this case, thread the upper thread and wind the bobbin thread properly. Also, ensure you're using the right combination of fabric, thread, and needle. A bent or blunt needle can also cause wrinkling, so replace it if necessary. Finally, incorrect thread tension can lead to wrinkles, so adjust the upper thread tension.
What causes an incorrectly sewn stitch on my Brother EX-660 Sewing Machine?
An incorrectly sewn stitch on your Brother Sewing Machine can be caused by using the wrong presser foot for the stitch type. Attach the correct presser foot. Also, incorrect thread tension can be a factor; adjust the tension of the upper thread.
Why is my Brother EX-660 making a high-pitched noise?
A high-pitched noise while sewing with your Brother Sewing Machine could be due to dust buildup in the feed dogs or bobbin case. Clean the bobbin case. Also, ensure the upper thread is threaded properly.
Lists and describes the main parts of the sewing machine.
Instructions for connecting and operating the sewing machine's power supply.
Step-by-step guide for winding and threading the bobbin and needle.
Step-by-step guide for basic sewing operations.
Tips for better sewing results, including trial sewing and fabric handling.
Details on overcasting, basic, blind hem, and buttonhole stitches.
Instructions for stretch fabrics, appliqués, quilting, and decorative stitches.
Table detailing settings for utility stitches.
Common problems, solutions, and machine cleaning instructions.
Warnings to reduce the risk of electric shock.
Warnings to reduce risks of burns, fire, electric shock, or injury.
Key information regarding plug suitability and fuse replacement.
Crucial warning about connecting wires to the earth terminal.
General| Type | Electronic Sewing Machine |
|---|---|
| Stitch Functions | 60 |
| Buttonhole Styles | 7 |
| Maximum Stitch Width | 7mm |
| Maximum Stitch Length | 5mm |
| Display | LCD |
| Needle Positions | Variable |
| Automatic Needle Threading | Yes |
| Drop-in Bobbin | Yes |
| Speed Control | Yes |
| Speed | Up to 850 stitches per minute |
To Next Page
