To Next PageTo Next PageWhy my Brother Multimeter does not work?
The Brother Multimeter might not be working due to exhausted batteries or poor contact of the inner batteries. Check the status of the batteries and verify the 0.5A fuse is in good condition and properly connected.
What to do if no measurements possible via V/mA socket on Brother Multimeter?
If you cannot get any measurements via the V/mA socket on your Brother Multimeter, the fuse may be defective. Check the 0.5A fuse and replace it if necessary.
Why are no measurements possible via 10A socket on my Brother HD-390I?
If no measurements are possible through the 10A socket on your Brother Multimeter, the fuse might be defective. Check the 10A fuse and proceed with a fuse replacement if needed.
What causes faulty measuring results on Brother HD-390I Multimeter?
Faulty measuring results on your Brother Multimeter could be due to a lack of null balancing of the display, an incorrect 0 Ohm calibration for resistance measurement, or improperly assembled batteries.
How to fix no change in measured values on Brother HD-390I?
When the measured values are not changing on the Brother Multimeter, ensure that you have selected the correct measuring sockets and that the measuring range/mode (AC/DC) is correct.
General| Brand | Brother |
|---|---|
| Model | HD-390I |
| Category | Multimeter |
| Language | English |
