Brother HL-5140 - Page 134

HL-5130/5140/5150D/5150DN Service Manual
4-33
(4) Remove the three cup B M3x10 Taptite screws, and then remove the star wheel holder.
Fig. 4-56
(5) Remove the cup B M3x12 Taptite screw.
(6) Release the thermistor ASSY harness from the four hooks.
(7) Remove the thermistor ASSY.
Fig. 4-57
Thermistor relay
PCB ASSY
Taptite, cup B M3x10
Fixing unit
Pin
Pin
Star wheel holder
Taptite, cup B M3x12
Fixing unit
Thermistor ASSY
Hook
Hook
Thermistor relay
PCB ASSY
Thermistor ASSY harness