Brother HL-L2300 - Paper Feed and Memory Issues

 Jam Tray (1)
The paper is jammed in the paper tray. Clear the paper jam.
 Out of Memory
The machine's memory is full. Reduce the print resolution.
Size Error DX (For automatic 2-sided printing models)
The paper size specified in the printer driver is not available for automatic 2-sided
printing or the paper in the tray is not the correct size and is not available for
automatic 2-sided printing.
LED indication]
LED Indication
.
The Paper (Yellow) LED is on.
The Toner, Drum and Ready LEDs are off
Meaning of LED Indication:
 Manual Feed
Manual was chosen as the paper source in the printer driver when there was
no paper in the manual feed slot. Place paper in the manual feed slot.
 No Paper
The machine is out of paper, or paper is not correctly loaded in the paper tray.
Follow the steps listed below to resolve the issue.
o Refill paper in the paper tray. Make sure the paper guides are set to
the correct size.
o Remove the paper and load it again. Make sure the paper guides are
set to the correct size.