3-49
Confidential
Fig. 3-47
Assembling Note:
• When securing the T1 clutch harness and the Registration clutch harness, check that
there is no harness slack.
• Attach the Rotation stopper of the T1 clutch by engaging it with the Pin of the machine
as shown in the figure below.
• Attach the Rotation stopper of the Registration clutch by engaging it with the Protruding
part of the machine as shown in the figure below.
Registration clutch
T1 clutch
Rotation stopper
Pin
Rotation stopper
Protruding part
To Next Page
Loading...
