4-3
Confidential
(8) Click the [OK] shown as (N).
The Execute Setting screen shown on the right appears
and the setting by spec is written to the machine.
(9) Click the [OK] shown as (Q) and close the Execute
Setting screen.
(10) Turn the power switch OFF and then ON again.
Note:
• Perform settings for a country as described in “1.3.16 Setting by spec (Function code 74)”
in Chapter 5.
Please contact Brother distributors for the latest information.
• Always turn the machine OFF and then ON again after setting the country. Turning the
power switch OFF and then ON again starts the EEPROM formatting. Time required for
formatting is 5 to 30 seconds depending on the product.
To Next Page
Loading...
