Brother HL-L2325DW - Replace Supplies

4-8
Confidential
(17) Click the [Get information] shown as (D). The machine maintenance information
appears.
(18) In the maintenance information, check
the Serial No. in the “Serial No.” field
and the Laser Adjusted value in the
“Laser Adjusted value(Position)” field.
(19) Click the [Cancel] shown as (R) and
close the Get Information screen.
(20) Turn the power switch OFF and then
ON again.
Note:
• For LCD models, serial number can be set by referring to “1.3.19 Display machine log
information (Function code 80)” in Chapter 5. Refer to “APPENDIX 1 SERIAL
NUMBERING SYSTEM” for how to check the serial number.
(R)