Brother HL-L2325DW - Page 40

2-18
Confidential
Error
Codes
Description
Refer
to:
Error
Codes
Description
Refer
to:
8A01
The registration rear sensor detected
that the paper fed was smaller or larger
than the specified size in duplex
printing mode.
2-47 9203 ---
8A02 --- 9204 ---
8B01 --- 9205 ---
8C00
There is no paper set in the manual
feed slot on the manual feed slot
printing.
2-48 9206 ---
8D01 --- 9301
When paper was fed from the MP tray,
the MP paper empty sensor detected
that no paper was in the MP tray.
2-49
8D02 --- 9302
When paper was fed from the paper
tray, the T1 paper feed sensor
detected that no paper was in the
paper tray.
2-49
8E01 --- 9303 ---
8E02 --- 9304 ---
8F01 --- 9305 ---
8F02 --- 9306 ---
8F03 --- 9309
Detected that there was no paper set
in all trays when TrayAuto was
selected for printing.
2-50
9001
The size of paper loaded in the MP
tray and the one specified from the
driver are not same when paper is fed
from the MP tray.
2-48
930A ---
9002
The size of paper loaded in the paper
tray and the one specified from the
driver are not same when paper is fed
from the paper tray.
2-48 9501 ---
9003 --- 9502 ---
9004 --- 9503 ---
9005 --- 9504 ---
9006 --- 9505 ---
9102 --- 9601 ---
9103 --- 9608 ---
9104 --- 9701
For 2-sided printing, paper size setting
of the printer driver that was not
supported by 2-sided printing was
selected.
2-50
9105 --- 9702
For printing by feeding paper from the
paper tray, the size of paper specified
from the driver set the size which was
not supported by the paper tray.
2-50
9200 --- 9703
9201
When printing from the MP tray, paper
type setting in the machine does not
match the setting in the driver.
2-48 9704
9202
When printing from the paper tray,
paper type setting in the machine does
not match the setting in the driver.
2-48 9705