2-24
Confidential
Print Unable
05
Turn the power off
and then back on
again.
Detected the fuser unit
temperature error.
0501 2-35
0502 2-35
0503 2-35
0504 2-35
0505 2-35
0506 2-35
0508 2-35
050A 2-35
050B 2-35
050C 2-35
Print Unable
09
Turn the power off
and then back on
again.
Detected irregular power supply
for more than 100 times.
0900 2-36
Print Unable
0A
Turn the power off
and then back on
again.
Detected a fan failure.
0A02 2-36
Print Unable
0B
Turn the power off
and then back on
again.
An error occurred in the high-
voltage power supply PCB
ASSY while operating.
0B01 2-37
An error occurred in the high-
voltage power supply PCB
ASSY when the machine was in
the ready state.
0B02 2-37
Print Unable
2E
Turn the power off
and then back on
again.
Could not communicate with the
cartridge sensor on the machine
side.
2E00 2-37
Print Unable
3A
Turn the power off
and then back on
again.
A communication error occurred
between the controller and
engine in main PCB.
3A00 2-37
Print Unable
E0
Turn the power off
and then back on
again.
An error occurred in the ROM
check sum.
E000 2-51
Print Unable
E1
Turn the power off
and then back on
again.
Program error
E100 2-51
Print Unable
E5
Turn the power off
and then back on
again.
An error occurred during access
to the DRAM in the main PCB
ASSY.
E500 2-51
Print Unable
E6
Turn the power off
and then back on
again.
Write error in the EEPROM of
the main PCB ASSY
E600 2-51
Error message
Description
Error
codes
Refer
to:
Initial display Scroll
To Next Page
Loading...
