App. 2-1
Confidential
APPENDIX 2 DELETING USER SETTING
INFORMATION
The user setting information for the machine is stored in the main PCB. You can return this to
the default settings by following the procedure below.
<Operating Procedure>
LED models
(1) Press and hold the [Go] key with the
front cover of the machine closed, and
turn ON the power switch of the
machine. Check that the Toner, Drum,
and Paper LEDs light.
(2) Release the [Go] key, and check that
all LEDs go out.
(3) Press the [Go] key ten times. When
completed, the machine returns to the
ready state automatically.
LCD models
(1) Press the [▲] or [▼] key to display
"Reset Menu" on the LCD, and press
the [OK] key.
(2) Press the [▲] and [Back] keys
simultaneously. "Settings Reset" is
displayed on the LCD.
(3) Press the [OK] key. "Restart Printer?"
is displayed on the LCD.
(4) Press the [OK] key. When completed,
the machine returns to the ready state
automatically.
To Next Page
Loading...
