3-63
Confidential
Fig. 3-54
Assembling Note:
• Raise the Damper L ASSY. Rotate the DEV release gear Z34 counterclockwise until it
stops. Align the end of the DEV clutch cam with the reference line of the DEV cam cover,
and then attach the DEV release drive gear Z33. If you neglect to do this, the error code
6E00 occurs.
DEV release drive gear Z33
Damper L ASSY
DEV clutch cam
Reference line of DEV cam cover
<Left side>
DEV release gear Z34
(The shaft part in the center)
To Next Page
Loading...
