EasyManua.ls Logo

Brother HL-L3230CDW - Page 50

Brother HL-L3230CDW
306 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2-31
Confidential
Replace PF
Kit1
-
Number of used pages for the
PF kit 1 has reached the upper
limit.
5002 2-60
Replace
Toner
Open the Top
Cover, replace
Toner Cartridge.
Black (BK).
Dot counter of the toner
cartridge (black) or develop
roller counter has reached the
upper limit was detected.
4C01 2-59
Open the Top
Cover, replace
Toner Cartridge.
Cyan (C).
Dot counter of the toner
cartridge (cyan) or develop
roller counter has reached the
upper limit was detected.
4C04 2-59
Open the Top
Cover, replace
Toner Cartridge.
Cyan (C)/ Magenta
(M)/ Yellow (Y).
During printing, dot counter of
color toner cartridge or develop
roller counter has reached the
upper limit was detected.
4C05 2-59
Open the Top
Cover, replace
Toner Cartridge.
Magenta (M).
Dot counter of the toner
cartridge (magenta) or develop
roller counter has reached the
upper limit was detected.
4C03 2-59
Open the Top
Cover, replace
Toner Cartridge.
Yellow (Y).
Dot counter of the toner
cartridge (yellow) or develop
roller counter has reached the
upper limit was detected.
4C02 2-59
Replace WT
Box
Replace the Waste
Toner Box inside
the machine.
After the waste toner sensor
detected that the waste toner
box was almost full, pages more
than the specified number have
been printed.
4800 2-58
Self-
Diagnostic
Turn the power off,
then on again.
Leave the machine
for 15 min.
Some fuser unit errors occurred
at power-ON or upon recovery
from sleep mode.
6901 2-65
Will Automatically
Restart within 15
minutes.
After the error was detected at
the fuser unit, power was turned
ON again and the error is being
checked. (If power is turned
OFF and ON after error code
6901 occurred, this code is
displayed for about 15 minutes.)
6902 2-65
Short paper Open the Back
Cover and then
press Go.
The registration rear sensor
detected that the paper loaded
in the T1 was smaller than the
specified size.
8D01 2-71
Error message
Description
Error
codes
Refer
to:
First line Second line

Table of Contents

Other manuals for Brother HL-L3230CDW

Related product manuals