Brother HL-L5000D Service Manual

vi
Confidential
7. IF YOU REPLACE THE MX / TT / LT AND TT/LT CONTROL PCB ........................................ 4-15
7.1 Installing Firmware (Main Firmware) ............................................................................... 4-16
7.1.1 Checking firmware version .................................................................................. 4-16
7.1.2 Installing firmware ............................................................................................... 4-17
7.2 Adjusting Left-end and Upper-end Print Position (Function Code: 45) (TT only) ............ 4-18
CHAPTER 5 SERVICE FUNCTIONS
1. MAINTENANCE MODE ............................................................................................................... 5-1
1.1 How to Enter Maintenance Mode ...................................................................................... 5-1
1.1.1 Method of entering maintenance mode for service personnel .............................. 5-1
1.1.2 Method of entering end-user accessible maintenance mode ............................... 5-3
1.2 List of Maintenance Mode Functions ................................................................................ 5-4
1.3 Details of Maintenance Mode Functions ........................................................................... 5-5
1.3.1 Initialize EEPROM parameters (function code: 01, 91) ........................................ 5-5
1.3.2 Print quality test pattern (function code: 09) ......................................................... 5-6
1.3.3 Set worker switches (WSW) and
print worker switch setting data (function code: 10, 11) ........................................ 5-7
1.3.4 Check LCD operation (function code: 12) ........................................................... 5-10
1.3.5 Check control panel key operation (function code: 13) ....................................... 5-12
1.3.6 Display software version (function code: 25) ...................................................... 5-13
1.3.7 Change OnePushDemo function setting (function code: 28) .............................. 5-14
1.3.8 Check sensor operation (function code: 32) ....................................................... 5-15
1.3.9 Display LAN connection status (function code: 33) ............................................ 5-21
1.3.10 Change USB No. return value / Adjust left-end print position /
Adjust upper-end print position / Set HEXDUMP mode (function code: 45) ....... 5-22
1.3.11 Adjust printable range for each speed level
(Full speed / Half speed for thick paper / Quiet Mode) (function code: 46) ......... 5-25
1.3.12 Adjust touch panel (function code: 61) (Touch panel models only) .................... 5-27
1.3.13 Continuous print test (function code: 67) ............................................................ 5-28
1.3.14 Print frame pattern (single-side printing) (function code: 69) .............................. 5-33
1.3.15 Print frame pattern (duplex printing) (function code: 70) ..................................... 5-34
1.3.16 Print test pattern (function code: 71) ................................................................... 5-35
1.3.17 Configure for country/region and model (function code: 74) ............................... 5-38
1.3.18 Print maintenance information (function code: 77) ............................................. 5-41
1.3.19 Check main fan operation (function code: 78) .................................................... 5-43
1.3.20 Display machine log information (function code: 80) .......................................... 5-44
1.3.21 Display machine error code (function code: 82) ................................................. 5-48
1.3.22 Reset counters for consumable parts (function code: 88) .................................. 5-49
1.3.23 Quit maintenance mode (function code: 99) ....................................................... 5-50
2. OTHER SERVICE FUNCTIONS ................................................................................................ 5-51
2.1 Print Printer Settings ....................................................................................................... 5-51
2.2 Reset the Drum Unit Counter .......................................................................................... 5-52
CHAPTER 6 WIRING DIAGRAM
1. WIRING DIAGRAM ..................................................................................................................... 6-1

Brother HL-L5000D Specifications

General

Color	No
N-up printing	2, 4, 9, 16, 25
Duplex printing	Yes
Print technology	Laser
Maximum resolution	1200 x 1200 DPI
Duplex printing mode	Auto
Time to first page (black, normal)	7.2 s
Print speed (black, normal quality, A4/US Letter)	- ppm
Duplex print speed (black, normal quality, A4/US Letter)	20 ppm
Printing colors	Black
Maximum duty cycle	50000 pages per month
Recommended duty cycle	0 - 3500 pages per month
Number of print cartridges	1
Page description languages	Epson FX, IBM ProPrinter, Microsoft XPS, PCL 6, PDF 1.7, PostScript 3
Processor family	ARM Cortex
Sound power level (standby)	34 dB
Sound pressure level (printing)	52 dB
Sound pressure level (quiet mode)	50 dB
Paper input type	Cassette, Paper tray
Total input capacity	250 sheets
Total output capacity	150 sheets
Multi-Purpose tray input capacity	50 sheets
Custom media width	76.2 - 215.9 mm
Custom media length	127 - 355.6 mm
Paper tray media types	Plain paper, Recycled paper, Thick paper, Thin paper
Paper tray media weight	60 - 120 g/m²
Non-ISO print media sizes	Executive (184 x 267mm), Folio (media size), Letter (media size), Legal (media size)
ISO A-series sizes (A0...A9)	A4, A5, A6
Multi-purpose tray media types	Bond paper, Envelopes, Labels, Letterhead, Plain paper, Recycled paper, Thick paper, Thicker paper, Thin paper
Maximum ISO A-series paper size	A4
Multi-Purpose Tray media weight	60 - 200 g/m²
Display	LCD
Product color	Graphite
Display number of lines	1 lines
Mobile printing technologies	Not supported
Direct printing	-
Standard interfaces	Parallel, USB 2.0
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
AC input frequency	50 - 60 Hz
Power consumption (off)	0.04 W
Power consumption (standby)	32 W
Power consumption (printing)	640 W
Power consumption (PowerSave)	390 W
Storage temperature (T-T)	0 - 40 °C
Operating temperature (T-T)	10 - 32 °C
Storage relative humidity (H-H)	35 - 85 %
Operating relative humidity (H-H)	20 - 80 %
Harmonized System (HS) code	84433210

Weight and Dimensions

Depth	388 mm
Width	373 mm
Height	255 mm