Brother HL-L5100DNT - Display Machine Error Code (Function Code: 82)

5-48
Confidential
1.3.21 Display machine error code (function code: 82)
<Function>
This function is used to display the latest error code on the LCD.
<Operating Procedure>
Non touch panel models
(1) Press the [▲] or [▼] key in the initial
state of maintenance mode to display
"MAINTENANCE 82" on the LCD, and
press the [OK] key. "MACHINE ERR
XXXX" is displayed on the LCD.
(2) Press the [X] key, and the machine
returns to the initial state of
maintenance mode.
Touch panel models
(1) Press the [8], and then the [2] key in
the initial state of maintenance mode.
"MACHINE ERR XXXX" is displayed
on the LCD.
(2) Press the [X] key, and the machine
returns to the initial state of
maintenance mode.