To use the Machine Safely
Please keep these instructions for later reference and read them before attempting any
maintenance. If you do not follow these safety instructions, there is a possibility of a fire,
electrical shock, burn or suffocation.
Failure to follow the warnings in this section may create the risk of an electrical shock. In
addition, you could create an electrical short, which may create the risk of a fire.
There are high-voltage electrodes inside the product. Before
you access the inside of the product, including for routine
maintenance such as cleaning, make sure you have unplugged
the telephone line cord first (MFC models only) and then the
power cord from the AC power outlet, as well as any telephone/
RJ-11 (MFC models only) or Ethernet/RJ-45 cables (Network
models only) from the product. DO NOT push objects of any
kind into this product through slots or openings in the product,
as they may touch dangerous voltage points or short out parts.
DO NOT handle the plug with wet hands. Doing this might cause an
DO NOT use this product during a thunder
storm. There may be a remote risk of
Always make sure the plug is fully inserted. DO NOT use the product or handle the cord if
the cord has become worn or frayed.
DO NOT allow this product to come into contact with water. This product should not be used
around standing water, including a bath tub, sink,
or swimming pool; around appliances
containing water, including a refrigerator; or in a
This product should be connected to an AC power source within the range indicated on the
rating label (You can find the rating label on your
machine). DO NOT connect it t
power source or inverter. If you are not sure what kind of power source you have, contact a
When removing the Low-voltage power supply, do not touch it within
after disconnecting the AC cord as it may cause an electric
shock due to the electric
charge accumulated in the capacitor.
To Next Page
Loading...
