Brother MFC-L2712DN - Page 35

S
i
z
e
E
r
r
o
r
S
p
e
c
i
f
y
t
h
e
c
o
r
r
e
c
t
paper size for Tray
1.
For printing by feeding paper
from the paper tray, the size of
paper specified from the driver
set the size which was not
supported by the paper tray.
9
7
0
2
2
-
6
4
Size Error 2-
sided
Press [OK]. Specify
the correct paper
and load the same
size paper as the
Printer driver
setting.
For 2-sided printing, paper size
setting of the printer driver that
was not supported by 2-sided
printing was selected.
9
7
0
1
2
-
6
4
Press Stop[x].
Specify the correct
paper and load the
same size paper as
Printer driver
setting.
The registration rear sensor
detected that the paper fed was
smaller or larger than the
specified size in duplex printing
mode.
8
A
0
1
2
-
6
1
Size
mismatch
Reload
correct
paper.
Paper size is not set as A4/
Letter/Legal/Folio when
receiving fax or printing a list/
report.
8
E
0
1
2
-
6
2
Detected that the size of paper
set in the paper tray was over
10 mm shorter than paper size
set in the machine during faxing
or printing a list or report.
8
E
0
2
2
-
6
2
Reload correct
paper in MP Tray,
then press [Retry].
The size of paper loaded in the
MP tray and the one specified
from the driver are not same
when paper is fed from the MP
tray.
9
0
0
1
2
-
6
2
Reload correct
paper in Tray1, then
press [Retry].
The size of paper loaded in the
paper tray and the one specified
from the driver are not same
when paper is fed from the
paper tray.
9
0
0
2
2
-
6
2
Error message
Description
Error
codes
Refer
to:
U
p
p
e
r
l
i
n
e
L
o
w
e
r
l
i
n
e