WARNING
HOT SURFACE
The machine's internal parts will be extremely
hot. Wait for the machine to cool down before
touching them.
4
Use both hands to gently pull the
jammed paper out of the fuser unit.
5
Close the fuser cover.
6
Close the back cover until it locks in the
closed position.
Paper is Jammed inside the
Machine
If the machine's control panel or the Status
Monitor indicates that there is a jam inside the
machine, follow these steps:
1
Leave the machine turned on for 10
minutes for the internal fan to cool the
extremely hot parts inside the machine.
2
Open the front cover.
3
Remove the toner cartridge and drum
unit assembly.
56
To Next Page
Loading...
