Do you have a question about the Brother VX1140 and is the answer not in the manual?
Type | Mechanical |
---|---|
Number of Stitches | 14 |
Buttonhole Styles | 1 |
Maximum Stitch Width | 5 mm |
Maximum Stitch Length | 4 mm |
Free Arm | Yes |
Bobbin Type | Drop-in |
Speed | 800 stitches per minute |
Outlines loosening driver shaft screws, adjusting clearance, and tightening screws for smooth rotation.
Details loosening zigzag base screws, aligning gears, and tightening to correct needle swing.
Explains setting selectors, lowering needle, loosening zigzag rod screw, centering, and tightening.
Covers setting width, lowering needle, loosening drive rod screw, raising needle, and aligning hook point.
Instructs to set width '5', lower needle right, loosen bar screw, adjust height, and tighten screw.
Details loosening motor holder screws, moving holder to adjust tension, and tightening screws.