Need help?Do you have a question about the Brother VX546 and is the answer not in the manual?
General| Brand | Brother |
|---|---|
| Model | VX546 |
| Category | Sewing Machine |
| Language | English |
Addresses common causes and solutions for skipped stitches during sewing operations.
Details troubleshooting steps for when the fabric is not advancing correctly.
Explains the reasons behind needle breakage and how to prevent it.
Troubleshooting for issues where the needle swing exceeds the maximum stitch width.
Addresses problems with uneven stitching in manual back and forth sewing modes.
Fixes for incorrect needle drop position at maximum stitch width.
Troubleshooting causes for upper thread breakage.
Troubleshooting causes for lower thread breakage.
Procedure to adjust the height of the presser bar for proper fabric feeding.
Procedure to adjust the height of the presser bar for specific models.
Instructions for adjusting the height of the needle bar.
Adjusting the clearance between the needle and hook point for specific models.
Adjusting the clearance between the needle and hook point for other models.
Setting the correct position of the shuttle hook for certain models.
Setting the correct position of the shuttle hook for other models.
Adjusting the sewing timing of the needle for the VX710 model.
Adjusting the sewing timing of the needle for specific VX500/VX600 series models.
Adjusting the sewing timing of the needle for other VX series models.
Procedure for setting the upper thread tension dial for the VX710 model.
Procedure for setting the upper thread tension dial for other VX series models.
To Next Page
