Need help?Do you have a question about the Brovision WH-N5208-P8 and is the answer not in the manual?
Details FCC compliance requirements and conditions for digital devices.
Declares product compliance with harmonized European standards and directives.
Lists general connectivity and compatibility features for network cameras.
Details features related to local video display and monitoring.
Describes hard disk drive capacity, connection, and management features.
Covers features for recording, capturing video, and playback operations.
Explains procedures for exporting and managing backup data.
Details handling of alarms, exceptions, and system events.
Outlines various local operational functions beyond core features.
Lists network protocols and connectivity options supported by the NVR.
Describes the physical components and buttons on the NVR's front panel.
Details the interfaces and ports located on the rear of the NVR.
Provides instructions for safely powering the NVR on and off.
Guides through initial NVR setup using the configuration wizard.
Explains how to add and connect network cameras to the NVR.
Details the process of discovering and adding cameras on the network.
Covers modifying camera settings and setting up custom communication protocols.
Guides on configuring cameras connected via the NVR's PoE ports.
Shows how to view the status and power usage of PoE ports.
Explains the live view function and on-screen icons.
Details various operations and controls available in live view.
Covers customization of output, dwell time, and camera order.
Explains how to reduce bandwidth for remote viewing of multiple channels.
Describes how to log out of the system interface.
Sets up communication parameters for PTZ cameras via RS-485.
Guides on creating and managing PTZ presets, patrols, and patterns.
Explains the interface for controlling PTZ camera movements.
Sets image quality, stream type, resolution, and recording parameters.
Schedules automatic recording or capture based on time and events.
Sets up recording triggered by motion detection events.
Configures recording triggered by external alarm inputs.
Enables recording triggered by Video Content Analysis events.
Allows manual start/stop of recording and continuous image capture.
Sets up custom recording schedules for holidays.
Enables saving data to both R/W and redundant HDDs for safety.
Organizes multiple HDDs into groups for managing recording storage.
Protects recorded files from overwriting by locking or setting HDD to read-only.
Details methods for searching and playing recorded video files.
Covers advanced playback features like frame-by-frame and smart search.
Explains how to search and view captured still images.
Guides on exporting recorded video files to backup devices.
Explains how to back up captured images from the NVR.
Covers managing connected backup storage devices like USB drives.
Details setting up a hot spare device for data redundancy.
Configures motion detection parameters and alarm response actions.
Sets up handling actions for external sensor alarms.
Configures alarms and response actions for video signal loss.
Sets up alarms and response actions for video tampering detection.
Configures alarms and response actions for Video Content Analysis events.
Manages response actions for system exceptions like HDD errors.
Defines how the system responds to triggered alarms or exceptions.
Allows manual control of alarm outputs.
Configures basic network parameters like IP address and working mode.
Sets up advanced network features like PPPoE, DDNS, and NTP.
Monitors real-time network activity and traffic data.
Tests network connectivity and exports network packets.
Prepares newly installed hard disk drives for use by initializing them.
Adds and manages NAS or IP SAN disks as network HDDs.
Configures and manages external eSATA devices for storage.
Organizes multiple HDDs into groups for better storage management.
Allocates specific storage quotas for recorded files or captured pictures.
Clones HDD data to an eSATA disk for backup or migration.
Monitors the operational status and health of installed HDDs.
Performs S.M.A.R.T. and Bad Sector detection for HDD reliability.
Sets up alarms and response actions for HDD errors or abnormal status.
Customizes on-screen display elements like date, time, and camera name.
Sets up privacy zones to mask specific areas in the video feed.
Adjusts camera image parameters like brightness and contrast.
Displays detailed information about the NVR, cameras, and system status.
Allows searching and exporting system operation, alarm, and exception logs.
Manages IP camera configuration data via import/export.
Exports and imports NVR system configuration files for backup or deployment.
Details methods for upgrading the NVR firmware.
Resets NVR parameters to factory default settings.
Sets up parameters for the RS-232 serial port for PC connection or device control.
Configures general NVR display and output settings.
Manages Daylight Saving Time settings for accurate timekeeping.
Adjusts various device-specific parameters and output modes.
Manages user accounts, permissions, and access levels for the NVR.
Solves issues related to missing video output on the monitor.
Addresses the audible alarm sound occurring upon NVR startup.
Troubleshoots IP camera connectivity issues causing it to appear disconnected.
Resolves issues where the live view freezes during local video output.
Troubleshoots live view freezing during remote access via IE or software.
Fixes problems with live view audio quality or volume.
Resolves playback freezing issues when viewing multiple channels simultaneously.
Addresses the issue of missing record files and the "No record file found" prompt.
To Next Page
General