Do you have a question about the BROWER TIMING SYSTEM TCi-System and is the answer not in the manual?
Model | TCi-System |
---|---|
Brand | BROWER TIMING SYSTEM |
Display | LCD |
Power Source | Battery |
Connectivity | Wireless |
Instructions for powering up the TCi-Timer using the On/Off button.
Steps to power on TCi-PhotoGate A and B by holding the On/Off button.
Guide on aligning TCi-PhotoGate B with A for optimal IR beam detection.
How to power on the TCi-Smart Start and enter an athlete number.
Explains the chronological counter for recorded events and how it advances.
Details on powering up the TCi-Timer and its memory retention.
Procedure to clear memory and reset the clock on the TCi-Timer.
How to start a new athlete and reset the clock, with conditions for adjusting Athlete #.
How to review recorded times and splits using memory buttons.
Using the manual start button for timing, noting potential accuracy issues.
Steps to power on and align TCi-PhotoGates A and B for IR beam detection.
How to select and set the operating mode for the TCi-Smart Start.
Setup for starting on motion with keypad input for athlete number.
Setting up for starts triggered by hand/foot detection with keypad.
Using the 'Ready Set Go' mode for timed sequences.
Details of the Chronograph mode for 1/100th second timing.
Using the 1/1000th second resolution mode for short spans.
Mode for calculating speed in kilometers per hour and miles per hour.
How to enable or disable Bluetooth Low Energy for smartphone connectivity.
Examples of what the display shows during live timing.
Examples of what the display shows in memory review.
Downloading and connecting the TCi-Timer smartphone app.
Creating start lists, managing sessions, and entering new athletes via app.
Viewing athlete splits, sorting data, and exporting session results from the app.
Solutions for units failing to power on or receive signals.
Guide to setting the radio frequency for system components.
Instructions for replacing batteries in TCi-Timer and TCi-PhotoGates.
Guidelines for system care and overview of technical specifications.
Examples of what the display shows during live timing.
Examples of what the display shows in memory review.