BROWN PB2 Series - Specifications

SPECIFICATION
PB2-SERIES
Model # PB2-800 PB2-1000 PB2-1200 PB2-1700
Overall Width 8’ 10’ 12’ 17’
Working Width 7’3” 8’6” 11’ 16’9”
H.P. Requirement 40-80 60-100 75-100 90-150
Weight - Lbs. 1925 2180 2480 2790
No. of Tines 48 56 72 88
Axle Length 50-1/8” 57-5/8” 72-5/8” 87-5/8”
Gang Arm Length 4x4x3/8 x 51-1/2” 4x4x3/8 x 59” 4x4x3/8 x 74” 4x4x3/8 x 109”
Gang Arm Quick Adjust Quick Adjust Quick Adjust Quick Adjust
Bearings - Guarded 1-1/2” Flange 1-1/2” Flange 1-1/2” Flange 1-1/2” Flange
Bearing Hanger Rigid Rigid Rigid Rigid
Light Kits
Standard DOT
Approved
Standard DOT
Approved
Standard DOT
Approved
Standard DOT
Approved
SMV Decal
Standard DOT
Approved
Standard DOT
Approved
Standard DOT
Approved
Standard DOT
Approved
Pull Kit and Weight Container Specications
PB2-800 PB2-1000 PB2-1200 PB2-1700
Pull Kit Part # PT-100 PT-100/PT-200 PT-200/PT-300 PT-300
Weight - Lbs. 840 840/980 980/1000 1000
No. of Tires 2 2/4 4 4
Hyd. Cylinder 3” x 12” 3” x 12” 3”x12”/4”x12” 4” x 12”
Tongue Jack Standard Standard Standard Standard
Weight Container
23-1/2” Cubes w/ Lift points - Approx. 8 Cubic Feet - 60 Lbs. shipping weight
Number of containers
per frame 3 3 5 6
13