Browning A-500 - Removing the Barrel with Forearm Attached; Removing Barrel;Forearm Part by Part Assembly

cleaning and also is convenient for storing your
A-500. There are two ways to disassemble your
A-500. You can remove the barrel with forearm,
spring and buffer attached, or remove the parts
one by one.
REMOVING THE BARREL WITH FOREARM
ATTACHED —
Draw the breechblock rearward and lock it
open.
Unscrew and remove the magazine cap.
With one hand, grip the barrel and
forearm, and pull them forward off of the
magazine tube together (with recoil spring
and forearm buffer inside).
For full disassembly, slide the forearm
forward, over the barrel ring. The buffer
and recoil spring will drop out.
REMOVING BARREL/FOREARM ASSEMBLY
PART BY PART —
Draw the breechblock rearward and lock it
open.
With your gun held vertically, unscrew and
remove the magazine cap.
22