Browning BL-22 LEVEL ACTION RIFLE User Manual

Crucial safety instruction to read the entire manual before use.

Section to record Browning Model, Serial Number, Purchase Date, etc.

Always keep the muzzle pointed in a safe direction.

Keep hammer dropped and finger off trigger when not shooting.

Do not use a hammer spur to prevent malfunctions.

Open action and check chamber/receiver when handling.

Do not transport the BL-22 loaded in any container.

Check barrel for obstructions before firing.

Ensure rifle is unloaded before cleaning or disassembly.

Always unload and store firearms and ammo separately from children.

Use SAAMI-compliant ammunition; avoid nonstandard types.

Examine each cartridge for proper caliber and condition.

Do not snap hammer on empty chamber; it may not be empty.

Keep finger off trigger when unloading or loading.

Know your target and backstop, especially in low light.

Be cautious on tree stands; ensure firearm is secure.

Dropping a loaded BL-22 can cause accidental discharge.

Unload and open action before crossing fences or obstacles.

Hold muzzle safe for 30s if rifle fails to fire, then unload.

Wear protection during shooting and disassembly.

Be alert for unsafe handling by others and suggest safer practices.

Supervise and teach firearms safety to family members.

Impaired judgment from substances is dangerous.

Service by Browning recommended centers; avoid unauthorized alterations.

Explains terminology for gun parts and their positions.

Ensure rifle is unloaded when unpacking for the first time.

Clean anti-rust compound from barrel and parts before first firing.

Use only designated .22 rimfire ammunition; read labels.

Hammer is fully to the rear; trigger pull fires rifle.

Half cock notch is for safety; not a recommended carrying position.

Hammer is fully down; recommended for carrying and storage.

Procedure for safely moving hammer from full cock to dropped position.

List code number, part name, caliber, model, and serial number when ordering.

Use only Browning parts; non-fitted parts may be dangerous.

Comprehensive list of all parts with corresponding key and part numbers.

Details capacity for .22 Long Rifle, Long, and Short cartridges.

Step-by-step guide to safely load the rifle's magazine and chamber.

Procedure for loading a single cartridge into the rifle.

Safe methods for unloading the rifle and magazine.

How to adjust rear sight for point of impact up or down.

How to adjust front/rear sights for lateral bullet impact.

Information on mounting scopes using grooved receiver.

Factory-set trigger pull; recommended adjustment by service centers.

Recommended steps for cleaning the rifle after shooting.

Steps for cleaning the barrel with rod, patch, and solvent.

Wipe down bolt, magazine tube, and receiver interior with light oil.

Wipe metal surfaces with oiled cloth and wood with light oil or wax.

Further disassembly beyond recommended steps is not advised.

Contact local Browning Service Center or Service Department for repairs.

Procedures for packaging, unloading, and shipping firearm for service.

Contact information for general questions about products or manuals.