chamber. This permits you to quickly change the
load in the chamber of the gun without going to
the trouble of unloading the whole magazine. For
instance, in this way a duck load can quickly be taken
out and a goose load inserted, if the need arises.
To operate the magazine cut-off, merely manipulate
the lever to the “MC” or “R” positions. The “MC”
position engages the magazine cutoff (See Figure
8-A). The “R” position (See Figure 8-B) places the
magazine in conventional repeater position,
chambering a shell from the magazine each time
the breechblock cycles rearward (as when you
shoot or manually cycle the breechblock).
Also, with the magazine cut-off in operation, and with
the chamber empty and the breechblock locked in
the rearward position, a loaded shell may be
30
To Next Page
Loading...