FIGURE 1
Slide
Manual
Thumb Safety
Rear Sight
Front Sight
Magazine
Release
Button
Magazine
8
FIGURE 2
NOMENCLATURE
In conventional gun terminology, the position and movement of
pistol parts are described as they occur with the pistol horizontal
and in normal firing position, i.e. the muzzle is forward or front; the
sights are upward or on top. For general nomenclature refer to
Figures 1 and 2. General functions and procedures are illustrated
Stop Open Latch
BUCK MARK
TARGET 5.5
Slide
Manual
Thumb Safety
Rear Sight Hood
Front Sight Hood
Magazine
Release
Button
Magazine
Stop Open Latch
To Next Page
Loading...