properly aligned the screw on the
trigger shoe will seat in one of
three recesses on the bottom of the
trigger plate.
Use an Allen wrench to tighten the
screw on the trigger. Be certain
the trigger shoe is secure before
firing, and periodically check the
shoe for any looseness as part of
your cleaning and general
maintenance procedures.
S E R V I C E O R R E P A I R
If your firearm should require service or repairs, we suggest you first
contact a local recommended Browning Firearms Service Center. To
locate a service center visit browning.com, contact our customer
service department or your Browning firearms dealer for the address
of the Service Center nearest you. Otherwise, you may send your
firearm directly to our service department in Arnold, Missouri.
Parts listings, Firearm Service Center lists, service procedures, service/
repair form and general product information are also found on the
internet at: browning.com. For technical questions about your firearm
or service, contact:
United States customers: Canadian customers:
Browning Service Department Browning Canada Sports Ltd/Ltée
One Browning Place 5583 Chemin St-François
Arnold, MO 63010-9406 St-Laurent, Quebec H4S 1W6
Phone: (800) 322-4626 Phone: (514) 333-7261
When returning your firearm for servicing, you must do the following:
1 Be sure it is completely unloaded.
2 Remove the scope or other optics.
3 Package it securely in a cardboard container.
4 When sending your firearm, enclose the service/repair form
available at browning.com or a letter that clearly describes the
trouble experienced, the ammunition used and the repairs desired.
Also include your name and a daytime phone number where you
can be reached.
5 If convenient, send a copy of the service/repair form or letter
to us separately.
6 Never return ammunition with your firearm. It is against postal
and most commerce regulations.
figure 16
Align the notch on the right side of the trigger
shoe with one of the three notches on the right
side of the trigger plate.
To Next Page
Loading...