EasyManua.ls Logo

Browning T-BOLT - Mounting a Scope; Scope Base Installation

Browning T-BOLT
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
19
it. You may continue to load and fire the rifle in this manner until
the magazine is empty.
6 If you are done shooting, leave the bolt to the rear, with the breech
in the open position so that you may visually inspect the chamber,
bore and magazine to be sure they contain no cartridges.
after firing, or when shooting is no longer imminent,
immediately Place the “safety” in the on safe Position.
failure to follow these warnings could result in serious
injury or death.
even with the Bolt oPen after shooting, do not assume the
rifle is unloaded. always insPect the chamBer, Barrel, feed
mechanism and magaZine to Be certain the rifle is comPletely
unloaded. failure to follow these warnings could result in
serious injury or death.
UNLOADING
when unloading your rifle always Place the “safety” in the
on safe Position. KeeP the muZZle Pointed in a safe direction
and your fingers away from the trigger. failure to follow
these warnings could result in serious injury or death.
always insPect the chamBer, Barrel and magaZine carefully
after unloading to Be sure all live cartridges are cleared
from the firearm.
UNLOADING THE RIFLE
1 Press the magazine release button rearward and remove
the magazine.
2 Draw the bolt to its rear or open position. This will extract and
eject any live cartridge that may be in the chamber. As a good
safety practice, always visually insect the chamber to be absolutely

Related product manuals