Broyhill H22SK2110-1 - User Manual

Need help?

Do you have a question about the Broyhill H22SK2110-1 and is the answer not in the manual?

Summary

Assembly Instructions

Product Identification

Provides the item number (H22SK2110-1) and SKU (810588246) for the Pembroke Stationary Sofa Chair.

Product Name

Identifies the product as the Pembroke Stationary Sofa Chair by Broyhill.

Assembly Guidance and Safety

General Best Practices

Offers tips for efficient assembly, including preparing space, using tools, and seeking assistance.

Assembly Warnings

Highlights critical safety information, such as keeping children away and respecting weight limits.

Product Maintenance

Provides instructions on cleaning, protecting, and regularly inspecting the sofa chair for longevity.

Assembly Steps

Step 1: Attaching Seat Assembly

Initiates assembly by connecting the seat assembly using specific bolts and washers, keeping them loose.

Step 2: Connecting Side Arms

Attaches the arm components to the seat assembly using specified hardware, maintaining loose fittings.

Step 3: Securing Back Assembly

Fastens the back assembly to the main frame, tightening all previously installed bolts.

Step 4: Adding Leg Caps

Installs leg caps and tightens all bolts using the provided hex key for structural integrity.

Step 5: Placing Cushions

Completes assembly by placing the back cushion and seat cushion onto the chair.

Post-Assembly Support

Warranty Information

Details the one-year limited warranty, requiring proof of purchase for claims.

Missing Part Assistance

Provides contact information for obtaining replacement parts if they are missing or damaged.

The Broyhill Pembroke Stationary Sofa Chair (Item#: H22SK2110-1, SKU#: 810588246) is a piece of outdoor furniture designed for sitting purposes. It is not intended for commercial use and has a weight limit of 250 lbs (113.5 kg).

Assembly Instructions:

The assembly process is divided into five steps, with a strong emphasis on best practices to ensure proper alignment and easy assembly. Users are advised to read all instructions before starting, clear a flat covered space, and ideally assemble the chair with a friend. It's important to note that all required hardware is provided for each step, and users should pay attention to the orientation of parts. Each part is identified by a letter corresponding to a sticker on the product, and hardware is numbered according to its letter in the package. Helpful hints are provided throughout the instructions, and users are encouraged to retain the assembly instructions for future reference.

Parts List (HKVS9151):

The chair consists of the following components:

1 (HKVS9151-BG): Back Assembly (Quantity: 1)
2 (HKVS9151-ZG): Seat Assembly (Quantity: 1)
3 (HKVS9151-SB): Arm (Quantity: 2)
4 (HKVS9151-JD): Leg Cap (Quantity: 4)
5 (LS-M6-35): Bolt M6*35 (Quantity: 8)
6 (LS-M6-45): Bolt M6*45 (Quantity: 8)
7 (LS-M6-50): Bolt M6*50 (Quantity: 2)
8 (DP-d6.5-D13): Washer d6.5D131.0 (Quantity: 20)
9 (LM-M6): Jam Nut M6*1.0 (Quantity: 2)
10 (HKVS9151-BM): Back Cushion (Quantity: 1)
11 (HKVS9151-ZM): Seat Cushion (Quantity: 1)

Assembly Steps:

Step 1: Involves attaching the arms (3) to the back assembly (1) using bolts (5) and washers (8). It is crucial to keep the bolts loose at this stage.
Step 2: Focuses on connecting the seat assembly (2) to the arms (3) using bolts (5) and washers (8). Again, bolts should remain loose.
Step 3: Requires connecting the back assembly (1) and seat assembly (2) using bolts (7), washers (8), and jam nuts (9). This is the step where all bolts from previous steps should be tightened using the supplied Hex key.
Step 4: Involves attaching the leg caps (4) to the bottom of the chair using bolts (6) and washers (8). All bolts should be tightened using the supplied Hex key.
Step 5: The final step is to place the back cushion (10) and seat cushion (11) onto the assembled chair.

Warnings:

Regularly check hardware and tighten if necessary.
Use the correct bolts as indicated. Do not tighten any of the bolts until the chair is completely assembled.
Do not discard any packaging until all parts and fittings are confirmed to be present.
Keep children away during assembly, as this item contains small parts that can be swallowed.
Children should always be under direct adult supervision while using the product.
Misuse of the loveseat, such as standing on it, may result in damage or injury.

Maintenance:

Frame and Fabric Parts: Wash with mild soap and water, rinse thoroughly, and dry completely. Avoid using bleach, acid, or other solvents.
Cushions: May be surface-washed only with mild soap and water or a commercial foaming upholstery cleaner. If washed, rinse well and hang to dry. Do not machine wash or dry.
General Care: The use of furniture covers is recommended when not in use.
Inspection: Regularly inspect and tighten all bolts and fasteners to ensure proper performance and safety.
Storage: To prolong the life and beauty of the chair, it is recommended to store it in a dry and protected area during off-season periods.

Warranty and Support:

The product comes with a one-year limited warranty. Proof of purchase (dated register receipt) is required for warranty claims. The customer is responsible for freight and packing charges to and from the service center for warranty claims.

For missing or damaged parts, customers are advised not to return to the store but to contact customer service directly. Toll-free support is available at 1-877-800-6021, Monday through Friday, from 9:00 AM to 4:30 PM Eastern Time. Email assistance is also available at service@hcipatio.com.