Do you have a question about the BRP Can-Am HD 4500 S 2020 and is the answer not in the manual?
Motor Type | Permanent Magnet |
---|---|
Gear Ratio | 166:1 |
Weight | 21.6 lb (9.8 kg) |
Voltage | 12V DC |
Pulling Capacity | 4500 lbs |
Rated Line Pull | 4500 lbs |
Cable Length | 50 ft (15.2 m) |
Cable Diameter | 7/32 in (5.5 mm) |
Learn how to reduce the risk of accident for you or bystanders by reading this guide before operating the winch.
This section explains the types of safety messages, their appearance, and how they are used in the guide.
Read this Operator's Guide. Always inspect and confirm the safe operating condition of your winch prior to winching.
List of items to be inspected before using the winch, detailing the inspection to perform for each.
Instructions to prevent injuries, including not putting fingers in the hook, using the hand strap, and avoiding the rope trajectory.
Information on preventing rope breakout, emphasizing staying clear of the rope trajectory and using protective measures.
Steps to prevent hazardous rope release, including engaging the clutch spool and maintaining tension.
Troubleshooting steps for motor issues like poor connection, defective remote, or tripped breakers.
Diagnosing and resolving issues related to motor power, such as weak battery or damaged motor.
Solutions for motor overheating, including cooling down periods or replacing a damaged motor.
Addressing problems where the winch cannot hold the applied load, like overload or internal brake damage.