System Functions
The display provides a number of user selectable modes and configuration menus. Select
modes affect display unit selection and screen appearance. Other modes interact with and
affect remote control and outboard operation and functionality.
The display interacts with other system components including the outboard(s) and the remote
control(s). The modes are used to select specific outboard or remote control operational
characteristics, system wide diagnostic functions, and sensor calibration functions.
Calibration and Display Mode Functions
• Calibration for:
o Tilt maximum level
o Trim upper and lower limits
o Fluid tank volumes and levels – up to 10 total
• Mode function for:
o Winterization
o Dynamic Power Steering (DPS) control
o iTrim control
• Hand or Foot Throttle selection
• Transom position of the outboard
• Backlight control
3
To Next Page