Need help?Do you have a question about the BRP Icon II 3.5” and is the answer not in the manual?
General| Brand | BRP |
|---|---|
| Model | Icon II 3.5” |
| Category | Measuring Instruments |
| Language | English |
Provides physical dimensions and measurements for the gauge installation.
Details required spacing and thickness for panel mounting.
Instructions for physically securing the gauge to the panel.
Guidance on connecting the gauge's wiring harness and power.
Describes how to power up the gauge display.
Allows setting of units, key beep, language, and engine parameters.
Enables setting calibration levels for fluid tanks, trim, and tilt.
Provides functionality to reset trip logs for Trip 1 and Trip 2.
Option to revert the display settings to factory defaults.
Displays current software version and related hardware information.
Selects between Hand or Foot throttle input for operation.
Enables or disables the automatic trim assist function.
Initiates the winterization process for long-term storage.
Adjusts the level of power steering assistance.
Details how to adjust the display's backlight brightness.
Displays Speed, RPM, Gear Position, Trim Position, and Fuel Level.
Displays Speed, RPM, Gear Position, Fuel Level, Trim Position, and Fuel Flow.
Displays Speed, RPM, Gear Position, Trim Position, and Water Pressure or Coolant Temp.
Displays fluid levels (fuel, oil, auxiliary) using bar graphs.
Displays fuel economy, trim, speed, fuel consumption, range, and fuel remaining.
Displays trip log data for Trip 1 and Trip 2: Distance, Run Time, Fuel Consumed.
Displays engine temperature, fuel economy, operating hours, pressure, throttle, and battery voltage.
Explains how the gauge displays active or current system faults.
Solutions for when the display does not power on.
Solutions for inaccurate trim position readings.
Solutions for water pressure display or accuracy problems.
Solutions for fuel and oil level display or accuracy problems.
Solutions for fuel economy data display or accuracy problems.
Solutions for on-board oil level display or accuracy problems.
To Next Page
