313
MMOONNIITTOORRIINNGG SSYYSSTTEEMM
PPiilloott LLaammppss,, MMeessssaaggeess aanndd BBeeeeppeerr CCooddeess
Gauge pilot lamp(s) will inform you if an anomaly occurs or to inform
you of a particular condition.
TTYYPPIICCAALL —— PPIILLOOTT LLAAMMPPSS
Pilot lamp can flash alone or in combination with another lamp.
On the digital gauge, a message may be displayed to complement the
pilot lamps to give you a brief description if an anomaly occurs or to in-
form you of a particular condition.
Messages will be displayed with a beep code and pilot lamp(s).
Beeper codes will be heard, and messages will be displayed to catch
your attention.
See table below for details.
NNOOTTEE::
Some of the listed pilot lamps and messages do not apply to all mod-
els. The message display is available only on the multifunction analog/
digital gauge.
PPiilloott
llaammpp
OONN
BBEEEEPPEERR
mmeessssaaggee
ddiissppllaayy
ddeessccrriippttiioonn
4 short
beeps
every
30 sec
onds
HIGH ENGINE
TEMPERA
TURE
Engine is overheating,
reduce snowmobile speed
and run in loose snow or
stop engine immediately
and let engine cool down.
Check coolant level, refer
to
Maintenance
. If coolant
level is correct and
overheating persists,
contact an authorized BRP
snowmobile dealer. Do not
run the engine if condition
persists.
MUFFLER
OVERHEAT
Reduce speed or stop
engine. Let engine cool
down and restart. If
overheating persists,
contact an authorized BRP
To Next Page