BRP ROTAX 916 i A Series - Component Sensor Locations; Boost Pressure Sensor Location; Manifold Air Pressure Sensor Location; Manifold Air Temperature Sensor Location

Boost Pressure
Sensor (BPS)
The boost pressure sensor for reading of the boost pressure
are located right before the throttle near the overboost valve.
Manifold Air Pres-
sure Sensor (MAP)
The manifold air pressure sensors are located on the airbox.
Manifold Air Tem-
perature Sensor
(MAT)
The manifold air temperature sensors are located on the airbox.
Page 7-18
December 01 2023
BRP-Rotax Effectivity: 916 i A / C24
Edition 0 / Rev. 1