To Next PageTo Next Page
Need help?Do you have a question about the BRP Sea-Doo GTI SE 130 2008 and is the answer not in the manual?
Procedures must be performed by authorized dealers for warranty.
Complete and retain signed predelivery check list.
Provide purchaser with Operator's Guide, Check List, and Safety Video.
Strict adherence to torque specifications and use of new locking devices.
Procedures for safely lifting and supporting the watercraft.
Securing the venturi using bolts and washers from the predelivery kit.
Preparing and installing the battery, including charging.
Step-by-step guide for charging and activating a new battery.
Guidelines for boost charging sealed VRLA batteries based on voltage.
Warning about overcharging sealed VRLA batteries and its effects.
Installing throttle cable and steering harness through console.
Installing cable support and securing with bolts and washers.
Attaching steering cable end to steering stem arm.
Securing steering assembly with bolts, washers, and elastic nuts.
Routing wire harness and throttle cable through direction support.
Connecting throttle cable to throttle lever, pulling sheath, and adjusting screw.
Aligning handlebar and X riser with steering stem.
Measuring distance from handlebar grip end to floorboard.
Checking jet pump nozzle position for equality.
Adjustment is performed at steering cable support if needed.
Loosen jam nut and turn adjustment nut to adjust throttle cable.
Warning not to adjust idle speed screw on throttle body.
Connecting steering harness connectors to main harness.
Fill tank with recommended fuel type as per SPECIFICATIONS TABLE.
Warning not to add oil in fuel.
Caution regarding fuel with high alcohol content.
Warning about fuel flammability and ventilation.
Verify fuel line connectors prior to powering up ECM.
Warning not to install safety lanyard before checking fuel line connector tightness.
Pressure test must be done before starting engine, refer to SHOP MANUAL.
Check coolant level with engine cold; never when hot.
Warning to program keys as per bulletin 2007-5.
Oil meeting API SL, SJ, SH for 4-stroke engines without superchargers.
BRP 4-stroke oil SAE 10W-40 for supercharged engines.
Do not use synthetic oil in 215/255 HP engines; avoid additives.
Procedure to verify oil level using dipstick.
Complete PREDELIVERY CHECK LIST and test ride.
Give a demo ride and explain watercraft operation.
Explain, complete, and return WARRANTY REGISTRATION CARD.
General