BRP SEA-DOO Switch 13 - Page 33

33
WWiinncchh LLuubbrriiccaattiioonn
Apply a thin coat of multipurpose
grease to the gearing teeth and pivot
points. Rotate handle to distribute
grease evenly.
Lubricate ratchet pivot point with light
oil.
JJaacckk
JJaacckk LLuubbrriiccaattiioonn
Remove plastic cap to lubricate gears
using multipurpose grease. Rotate
handle to distribute grease evenly.
TTYYPPIICCAALL
Lubricate handle pivot point and
wheel axle with light oil. Wipe excess
oil and rotate parts to distribute oil
evenly.
WWooooddeenn BBuunnkkss
Check wooden bunks carpet condition
and wood hardness.
MAINTENANCE AND INSPECTION PROCEDURES