210
Using the LOWER (M) button, select SSEETTTTIINNGGSS and hold to enter
setting menu.
RReesseett SSttaattss
Using LOWER button, select RREESSEETT SSTTAATT and hold to reset.
UUnniitt SSeelleeccttiioonn
This multifunction gauge is factory preset in metric units but it is possi-
ble to change it to imperial units.
Using LOWER button, select UUNNIITTSS and hold button to change units.
SSeettttiinngg CClloocckk
Using LOWER button, select CCLLOOCCKK to change the clock.
1. Press LOWER button to select clock display.
2. Push and hold LOWER button for 1 second.
3. Press LOWER button to select 12:00 AM PM or 24:00 time base.
4. Push and hold LOWER button to acknowledge selection.
5. Press LOWER button to change hours (hours flash).
6. Push and hold LOWER button to acknowledge hour selection.
7. Press LOWER button to switch to minutes (minutes flash).
8. Push and hold LOWER button to acknowledge minutes selection.
SSeettttiinngg LLaanngguuaaggee
The gauge display language can be changed. Refer to an authorized
BRP snowmobile dealer for language availability and to setup the
gauge to your preference.
GAUGE – 4.5” DIGITAL DISPLAY
To Next Page